User manual LG 60PA550T

[. . . ] User Guide This is a 「User Guide」 installed on TV. The contents of this guide are subject to change without prior notice for quality improvement. ❐❐To set favourite programmes SETTINGS ➾ SETUP ➙ Programme Edit 1 Press the Q. MENU button on the Programme Edit screen and select Favourite Group. The selected programme will be saved to your favourite. ❐❐To use Favourite Press the FAV button. The favourite list will appear. Select the desired preset favourite programme from Favourite List A-D. ❐❐Automatically Setting Up Programme SETTINGS ➾ SETUP ➙ Auto Tuning Automatically tunes the programmes. Programme settings change depending on the country you choose. [. . . ] 1 Connect the TV's HDMI IN terminal and the SIMPLINK device's HDMI output terminal using an HDMI cable. • [Depending on model] For home theatre units with a SIMPLINK function, connect HDMI terminals as above, and use an optical cable to connect Optical Digital Audio Out from the TV to Optical Digital Audio In of the SIMPLINK device. 3 In SIMPLINK Setting window, sets SIMPLINK function to ON. 4 In SIMPLINK menu window, selects the device you want to control. ✎✎ This function is only compatible with devices with the SIMPLINK logo. ✎✎ To use the SIMPLINK function, you need to use a high-speed HDMIⓇ cable (with CEC (Consumer Electronics Control) feature added). 13 pin connected for information exchange between devices. ✎✎ If you switch to another input, the SIMPLINK device will stop. ✎✎ If a third-party device with the HDMI-CEC function is also used, the SIMPLINK device may not work normally. ✎✎ [Depending on model] If you select or play media from a the device with a home theatre function, the HT Speaker is automatically connected. Be sure to connect with an optical cable (sold separately) to use the HT Speaker function. ❓❓SIMPLINK function description • Direct Play: Plays the multimedia device on the TV instantly. • Select multimedia device: Selects the desired device via the SIMPLINK menu to control it from the TV screen instantly. • Disc playback: Manages the multimedia device with the TV remote control. • Power off all devices: When you power off the TV, all connected devices are turned off. • Sync Power on: When the equipment with SIMPLINK function connected HDMI terminal starts to play, the TV will automatically turn on. • Speaker: [Depending on model] Select speaker either on the home theatre unit or the TV. SETTINGS ➾ PICTURE ➙ Energy Saving Reduces power consumption by adjusting screen brightness. • Intelligent Sensor : TV sensor detects the ambient lighting and automatically adjusts the screen brightness. • Off : Turns off Energy Saving mode. • Minimum / Medium / Maximum : Applies the pre-set Energy Saving mode. • Screen Off : Screen is turned off and only sound is played. Press any button on the remote control to turn the screen back on. ❐❐To use Sleep Timer SETTINGS ➾ TIME ➙ Sleep Timer To cancel the Sleep Timer, select Off. Turns off the TV after a preset number of minutes. ❐❐To set current time SETTINGS ➾ TIME ➙ Clock Checks or changes the time while watching TV. • Auto : Synchronizes the TV clock to the digital time information sent by the TV station. [. . . ] (If this does not work, reboot the computer. ) • Select Screen and adjust Position/Size/Phase. ❐❐Problems replaying movies in My Media ꕢꕢ I cannot view the files on the Movie List. • Check whether the file on the USB storage device can be read on a computer. • Check whether the file extension is supported. ꕢꕢ The file is invalid. Sound, video or subtitles is not normal. • Make sure that the file replays normally on the computer’s video player. (Check for damaged files. ) • Check if My Media can support the selected file. ✎✎ For information on requesting service, refer to the following menu. [. . . ]