User manual LG BH7540T

[. . . ] WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. [. . . ] 2. Select the CD or USB function by pressing FUNCTION on the remote control or FUNC. 3. Select a track/file you want to play by pressing Cc/vV on the remote control or C/V on the unit. To Stop Playback Pause Do this Press Z ENTER on the remote control or I on the unit. 1. Insert a CD or a USB and wait for it to be ordered. 2. Press PROGRAM/MEMO on the remote control in stop status. 5. Repeat steps 3-4 to select a next track/file. 6. Press d/M to play the programmed music tracks/files. 7. To clear your selection, press Z ENTER on the remote twice. The programs are also cleared when the disc or USB device is removed, the unit is powered off or the function is switched to others. Displaying file information (ID3 TAG) While playing an MP3 file containing file information, you can display the information by pressing INFO. Turn off the sound temporarily Press @MUTE on the remote control to mute your sound. You can mute your sound, for example, to answer the telephone, the mute symbol “ ” is displayed in the display window. To cancel it, press @MUTE again or change the volume level. 3 Operating Note , , CM1530-BT_ADEULLK_ENG_6525. indd 14 2014-01-13 2:03:37 Operating 15 Radio Operations Listening to the radio 1. Press FUNCTION on the remote control or FUNC. CT  (Time controlled by the channel) This shows the time and date as broadcast by the station. You can search the radio stations by programme type by pressing RDS. The display will show the last PTY in use. Press PTY/ASPM one or more times to select your preferred programme type. -/+ The tuner will search automatically. When a station is found, the search will stop. Using the Auto Station Programme Memory(ASPM) This function lets you automatically search and store 50 stations. Press FUNCTION on the remote control or FUNC. on the unit until FM appears in the display window. Press and hold PTY/ASPM for at least 3 seconds. After "ASPM" will blink in the display window, scanning will start. (87. 50 - 108. 00 MHz) To stop scanning, press PTY/ASPM again. [. . . ] Adjust its position. yy The signal strength of the radio station is too weak. Radio stations cannot be tuned in properly. yy No stations have been preset or preset stations have been cleared (when being tuned by scanning preset channels). Preset some radio stations, see page15 for details. [. . . ]