User manual LG DH4230S

[. . . ] WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. [. . . ] Press AD to adjust the Distance of the selected speaker. This distance is equivalent to a difference of the distance between Center or Rear speaker and Front speakers. [Speaker Test Start] Select [Speaker Test Start] by using the WS and press b ENTER. Adjust the volume to match the volume of test signals memorized in the system. Note , , 3 System Setting Audio 5. 1 Speaker Setup Make the following settings for the built-in 5. 1 channel surround decoder. 1. Select [5. 1 Speaker Setup] on the [Audio] menu. The [5. 1 SPEAKER] appears. 3. Use AD to select the desired speaker. 5. Returns to the previous menu by pressing x BACK. DH4230S-D0_BDEULLK_ENG_8521. indd 20 2013-05-14 12:24:14 System Setting 21 DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Lock (Parental Control) Initial Setting the Area Code: When you use this unit for the first time, you have to set the Area Code. 1. Select the [Lock] menu and then press D. To access the [Lock] options, you must input the password you have created. Enter it again and press b ENTER to verify. All the downloaded videos from DivX VOD can only be played back on this unit. 4. Press n HOME to exit the menu. If you forget your password, you can clear it using the following steps: 1. Select the [Setup] menu on the [Home Menu]. 2. Input the 6-digit number “210499” and press b ENTER. The password is cleared. Note , , 3 System Setting Area Code Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 34. 1. Select [Area Code] on the [Lock] menu then press D. 3. Select the first character using WS buttons. 4. Press b ENTER and select the second character using WS buttons. 5. Press b ENTER to confirm your Area code selection. Note , , DH4230S-D0_BDEULLK_ENG_8521. indd 22 2013-05-14 12:24:15 Operating 23 Using the Home Menu 1. Press n HOME. Displays the [Home Menu]. To Stop Playback Pause Do this Press Z STOP. Press M PAUSE/STEP. 2. Select an option by using AD. 3. Press b ENTER then selected option menu. [. . . ] When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again. Depending on the unit being connected, you may not be able to control your TV using some of the buttons. Note , , 6 Appendix DH4230S-D0_BDEULLK_ENG_8521. indd 32 2013-05-14 12:24:16 Appendix 33 Maintenance Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. [. . . ]