User manual LG DP432H

[. . . ] OWNER’S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. DP430H / DP432H DP432H-P_MFL67859911_DEU_Eng_1. 0. indd 1 2013-02-01 1:54:11 2 Getting Started Safety Information 1 Getting Started CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. [. . . ] In this case, press RESOLUTION repeatedly until the picture re-appears. Rear of the Unit HDMI Cable TV COAXIAL 2 Connecting Additional Information for HDMI yy When you connect a HDMI or DVI compatible device, make sure of the following: -- Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. -- The connected device’s video input is set correctly for this unit. -- The connected device is compatible with 720x576i(480i), 720x576p(480p), 1280x720p, 1920x1080i or 1920x1080p video input. -- The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution. yy Not all HDCP-compatible DVI devices will work with this unit. -- The picture will not be displayed properly with non-HDCP device. DP432H-P_MFL67859911_DEU_Eng_1. 0. indd 11 2013-02-01 1:54:14 12 Connecting yy If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq. ] option to [48 kHz] on the setup menu. yy If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. yy Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. yy If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. Audio Cable Receiver / Amplifier yy To see the audio format of the current disc in the on-screen display, press AUDIO. yy This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit’s digital audio outputs. Connecting to an Amplifier Connecting Audio Cable 2 Connecting Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. Note , , Rear of the Unit Connecting COAXIAL (digital audio) Cable Connect one of the unit’s DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifier. Connecting HDMI Cable Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable. (Type A, High Speed HDMI™ Cable) Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack. Rear of the Unit Coaxial Cable Receiver / Amplifier OPTICAL Rear of the Unit HDMI Cable TV COAXIAL HDMI Cable Receiver / Amplifier DP432H-P_MFL67859911_DEU_Eng_1. 0. indd 12 2013-02-01 1:54:15 System Setting 13 Settings When the unit is turned-on at the first time, you have to select the desired language. (Optional) [DISPLAY] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. 2. Use w/s to select the first setup option, and press d to move to the second level. 3. Use w/s to select a second setup option, and press d to move to the third level. 4. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. Display Mode If you selected 4:3, you’ll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [. . . ] ZOOM: 100% : 200% : 300% : 400% : 100% w/s/a/d: Move through the zoomed photo. Listen to music You can listen to music during during slide slide show, if the disc contain show music and photo files together. Use w/s/a/d to highlight (~) icon then press ENTER (b) to start slide show. 4 Operating DP432H-P_MFL67859911_DEU_Eng_1. 0. indd 18 2013-02-01 1:54:16 Troubleshooting 19 Troubleshooting Symptom No power. The power is on, but the unit does not work. [. . . ]