User manual LG DP522H

[. . . ] ENGLISH OWNER'S MANUAL DVD Player Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. DP520H/DP522H DP522H-P. BGBRLLK-1234_ENG. indd 1 2012-02-28 9:23:06 2 Getting Started Safety Information 1 Getting Started CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. [. . . ] - The connected device is compatible with 720x576i(480i), 720x576p(480p), 1280x720p, 1920x1080i or 1920x1080p video input. - The 1080p, 720p and 576p(480p) resolutions are the progressive scan applied resolution. y Not all HDCP-compatible DVI devices will work with this unit. - The picture will not be displayed properly with non-HDCP device. DP522H-P. BGBRLLK-1234_ENG. indd 11 2012-02-28 9:23:20 12 Connecting y If your TV is not capable of handling 96 kHz sampling frequency, set the [Sample Freq. ] option to [48 kHz] on the setup menu. y If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu. y Changing the resolution when the unit is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. y If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. Audio Cable Receiver / Amplifier Connecting to an Amplifier Connecting Audio cable 2 Connecting Connect the AUDIO OUTPUT on the unit to 2CH AUDIO IN on amplifier with Audio cable, such as AUDIO Left/Right with white/red. , Note Rear of the Unit y To see the audio format of the current disc in the on-screen display, press AUDIO. y This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this unit's digital audio outputs. Connecting COAXIAL (digital audio) cable Connect one of the unit's DIGITAL AUDIO OUTPUT (COAXIAL) jacks to the corresponding jack on your amplifier. Connecting HDMI cable Connect the HDMI OUTPUT on the unit to the HDMI IN on amplifier with HDMI cable. (Type A, High Speed HDMITM Cable) Connect the HDMI OUT jack on amplifier to HDMI IN jack on TV with HDMI cable, if the amplifier has HDMI OUTPUT jack. Rear of the Unit Coaxial Cable Rear of the Unit HDMI Cable Receiver / Amplifier TV COAXIAL OPTICAL HDMI Cable Receiver / Amplifier DP522H-P. BGBRLLK-1234_ENG. indd 12 2012-02-28 9:23:22 System Setting 13 Settings When the unit is turned-on at the first time, you have to select the desired language. [DISPLAY] Menu TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Adjust the Setup Settings You can change the settings of the unit in the [Setup] menu. Use w/s to select the first setup option, and press d to move to the second level. Use w/s to select a second setup option, and press d to move to the third level. Use w/s to select a desired setting, and press ENTER (b) to confirm your selection. Display Mode If you selected 4:3, you'll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. 3 System Setting [LANGUAGE] Menu Menu Language Select a language for the Setup menu and onscreen display. Disc Audio/Subtitle/Menu Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER (b) to enter the corresponding 4-digit number according to the language code list. (See page 21) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [. . . ] The video cable is not connected securely. 5 Troubleshooting The TV does not accept the Press RESOLUTION repeatedly to select resolution that is set on the unit. The equipment connected with the audio cable is not set to receive the signal from the unit. The AUDIO options are set to the wrong position. Select the correct input mode of the audio amplifier. [. . . ]