User manual LG E2242T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual LG E2242T. We hope that this LG E2242T user guide will be useful to you.

Lastmanuals help download the user guide LG E2242T.


LG E2242T : Download the complete user guide (4091 Ko)

You may also download the following manuals related to this product:

   LG E2242T (3987 ko)

Manual abstract: user guide LG E2242T

Detailed instructions for use are in the User's Guide.

[. . . ] Otherwise electric shock may occur. 10 cm 10 cm 10 cm 10 cm Using the cable holder 2 Connect the AC-DC Adapter and Power Cord to a wall outlet. Cable holder or ASSEMBLING AND PREPARING 7 WARNING When you adjust the angle, do not hold the bottom of the Monitor set frame as shown on the following illustration, as may injure your fingers. Using the Kensington security system The Kensington security system connector is located at the back of the Monitor set. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www. kensington. com. Connect the Kensington security system cable between the Monitor set and a table. ENG ENGLISH Do not touch or press the screen when adjusting the angle of the monitor. Do not hold this set like below picture. Monitor screen can detach from stand base and injure your body. NOTE The Kensington security system is optional. You can obtain it from most electronics stores. NOTE Tilt from +20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view. Front Rear 8 ASSEMBLING AND PREPARING Mounting on a wall For proper ventilation, allow a clearance of 10 cm on each side and from the wall. [. . . ] · When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. · When only one signal is connected, it is automatically detected. Power Indicator The power indicator stays red if the display is running properly (On Mode). If the display is in Sleep Mode, the power indicator blinks red. 12 CUSTOMIZING SETTINGS Customizing Settings ENGLISH ENG Menu Settings 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. buttons. 2 Set the options by pressing the or or 3 Select the "NEXT MENU" button to enter the more option settings. 4 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU BRIGHTNESS CONTRAST WIDE/ORIGINAL Analog Digital Description To adjust the brightness, contrast of the screen WIDE Switch to full screen mode according to input image signal. * This function works only if input resolution is lower than Monitor set ratio (16:9). Press the , buttons to reset immediately. MENU > NEXT MENU PICTURE COLOR DISPLAY SHARPNESS GAMMA COLOR TEMP HORIZONTAL VERTICAL CLOCK PHASE OTHERS LANGUAGE POWER INDICATOR WHITE BALANCE Analog Digital Description To adjust the clearness of the screen . To customize the color of the screen To adjust the position of the screen To improve the clarity and stability of the screen To customize the screen status for a user's operating environment y Analog: D-SUB(Analog signal) input. y Digital: DVI-D(Digital signal) input. CUSTOMIZING SETTINGS 13 PICTURE ENG ENGLISH 1 Press MENU button on the bottom of the Monitor set to display the MENU OSD. option settings. 2 Select the "NEXT MENU" button to enter the more 3 Enter to PICTURE by pressing the button. option settings. 2 Select the "NEXT MENU" button to enter the more 3 Select OTHERS by pressing the button. 5 Set the options by pressing the or or buttons. 6 Select EXIT to leave the OSD menu. To return to the upper menu or set other menu items, use the up arrow ( ) button. Each option is explained below. MENU > NEXT MENU > OTHERS LANGUAGE POWER INDICATOR WHITE BALANCE Description To choose the language in which the control names are displayed. Use this function to set the power indicator on the bottom side of the monitor to ON or OFF. If you set OFF, it will go off. If you set ON at any time, the power indicator will automatically be turned on. If the output of the video card is different the required specifications, the color level may deteriorate due to video signal distortion. Using this function, the signal level is adjusted to fit into the standard output level of the video card in order to provide the optimal image. Activate this function when white and black colors are present in the screen. CUSTOMIZING SETTINGS 17 SUPER ENERGY SAVING Setting ENG ENGLISH 1 Press ( SUPER ENERGY SAVING ) button on the bottom of the Monitor set to display the SUPER ENERGY SAVING OSD. 2 Set the options by pressing the or or buttons. 3 Select EXIT to leave the OSD menu. Each option is explained below. SUPER ENERGY SAVING ON OFF RESET Description Enables SUPER ENERGY SAVING you can save energy with this energy- efficient function Disables SUPER ENERGY SAVING. Resets the values of total energy consumption reduction and CO2 emission reduction estimates. NOTE y TOTAL POWER REDUCTION: How much power is saved while using the monitor. y SAVING DATA(W/h) 470 mm (18. 5 inch) SUPER SAVING 4 W/h 508 mm (20 inch) 5 W/h 546 mm (21. 5 inch) 6 W/h 584 mm (23 inch) 7 W/h 609 mm (24 inch) 7 W/h y Saving Data depends on the Panel. y LG calculated these values by using "broadcast video signal" (including broadcast video: IEC 62087) y SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING function. 18 CUSTOMIZING SETTINGS PICTURE MODE Setting ENGLISH ENG 1 Press MODE button on the bottom of the Monitor set to display the PICTURE MODE OSD . 3 Select EXIT to leave the OSD menu. Each option is explained below. PICTURE MODE CUSTOM TEXT PHOTO CINEMA GAME Description It is a mode that the user can adjust each element. [. . . ] Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1600 x 900 @ 60 Hz DVI (Digital) : 1600 x 900 @ 60 Hz VESA 1600 x 900 @ 60 Hz ENG ENGLISH Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 3 kg -5° to 20° 1. 3 A 47. 4 cm x 36. 6 cm x 16. 8 cm 47. 4 cm x 29. 2 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. 24 SPECIFICATIONS SPECIFICATIONS E2242S Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog) On Mode : 23 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 2 A 54. 6 cm (21. 5 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 54. 6 cm 0. 247 mm x 0. 247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB) Separate Sync. 15 pin D-SUB Connector RGB Analog (0. 7 Vp-p/ 75 ohm) D-SUB(Analog) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz ENGLISH ENG Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 6 kg -5° to 20° 1. 3 A 50. 9 cm x 38. 7 cm x 18. 1 cm 50. 9 cm x 31. 3 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 25 SPECIFICATIONS E2242T Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog, Digital) On Mode : 23 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 2 A 54. 6 cm (21. 5 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 54. 6 cm 0. 247 mm x 0. 247 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz ENG ENGLISH Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 6 kg -5° to 20° 1. 3 A 50. 9 cm x 38. 7 cm x 18. 1 cm 50. 9 cm x 31. 3 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. 26 SPECIFICATIONS SPECIFICATIONS E2342T ENGLISH ENG Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog, Digital) On Mode : 24 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 3 A 58. 4 cm (23 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 58. 4 cm 0. 265 mm x 0. 265 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) Separate Sync. Digital 15 pin D-SUB Connector /DVI-D Connector (Digital) RGB Analog (0. 7 Vp-p/ 75 ohm), Digital D-SUB(Analog) : 1920 x 1080 @ 60 Hz DVI (Digital) : 1920 x 1080 @ 60 Hz VESA 1920 x 1080 @ 60 Hz Sync Input Video Input Resolution Plug & Play Power Consumption Power Input AC-DC Adapter Type ADS-40SG-19-3 19032G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19032GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26A-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE OUTPUT: 19 V 1. 7 A Type ADS-40SG-19-3 19025G, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPG-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPBR-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPI-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type ADS-40FSG-19 19025GPCU-1, manufactured by SHENZHEN HONOR ELECTRONIC or Type LCAP21, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-A, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-E, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-I, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE or Type LCAP26-B, manufactured by LIEN CHANG ELECTRONIC ENTERPRISE Dimensions (Width x Height x Depth) Weight Tilt Range Environmental conditions OUTPUT: 19 V With Stand Without Stand 2. 9 kg -5° to 20° 1. 3 A 54. 4 cm x 40. 6 cm x 18. 1 cm 54. 4 cm x 33. 2 cm x 5. 5 cm Operating Temperature 10°C to 35 °C Operating Humidity 10 % to 80 % Storage Temperature Storage Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached (O) Wall-outlet type Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 27 SPECIFICATIONS E2442T Display Screen Type Pixel Pitch Horizontal Frequency Vertical Frequency Input Form Signal Input Input Form Max Recommend DDC 2B(Analog, Digital) On Mode : 25 W(Typ. ) Sleep Mode 0. 3 W Off Mode 0. 3 W 19 V 1. 6 A 60. 9 cm (24 inch) Flat Panel Active matrix-TFT LCDAntiGlare coating Visible diagonal size: 60. 9 cm 0. 277 mm x 0. 277 mm (Pixel Pitch) 30 kHz to 83 kHz (Automatic) 56Hz to 75Hz (D-SUB, DVI-D) Separate Sync. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE LG E2242T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual LG E2242T will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag