User manual LG F14U1FCN8

[. . . ] OWNER’S MANUAL WASHING MACHINE Before beginning installation, read these instructions carefully. This will simplify installation and ensure that the washer is installed correctly and safely. Leave these instructions near the washer after installation for future reference. F14U1FCN(0~9) F12U1FCN(0~9) MFL68128013 www. lg. com Contents Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Features. . . . . . . . . . . . . . . . . . . . . . 3 Important safety instructions Important safety instructions. . . . . . . . . . . . . . . . . . . . 4 Basic safety precautions. . . . . . . . . . . . . . . . . . . . . . . . . . 5 Save these instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Thank you for buying a LG Fully Automatic Washing Machine. Please read your owner’s manual carefully, it provides instruction on safe installation, use and maintenance. [. . . ] The Favorite program is now stored for future use. To reuse the program, select Favorite program and touch the Start/Pause. 22 How to use washer Delay ( ) Rinse ( • Rinse plus ( ) ) : Add rinse once. You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. NOTE • The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash load and other factors. Touch the Time Delay button and set time required. Touch the Start/Pause button. • Rinse Hold ( ) : The cycle is paused until start button is touched again when rinse is finished. Wash ( ) Spin • Spin Speed level can be selected by touching 'Spin' button repeatedly. Touch the Start/Pause. • Turbo Wash ( ): Wash cycle in under 1 hour with energy and water saving. • Intensive ( ) : If the laundry is normal and heavily soiled, “Intensive” option is effective. Temp. • By touching the Temp. button the water temperature can be selected. - Cold - 20°C, 30°C, 40°C, 60°C, 95°C • Water temperature can be selected according to the program. NOTE When you select "No Spin", it will still rotate for a short time with low speed to drain quickly. 23 How to use washer I Child Lock Select this function to lock the buttons on the control assembly to prevent tampering. "Child Lock" can be set only during the washing cycle. Touch and hold the Child Lock button for 3 seconds. A beeper will sound, and ' ' will appear on the LED display. When the child lock is set, all buttons are locked except the Power button. NOTE • Turning off the power will not reset the child lock function. You must deactivate child lock before you can access any other functions. Touch and hold the Child Lock button for 3 seconds. A beeper will sound and the remaining time for the current programme will reappear on the LED display. I Beep On / Off The Beep on/off function can be set only during the washing cycle. and Rinse button simultaneously for three seconds to set Beep on/off function. Once the Beep on/off function is set, the setting is memorized even after the power is turned off. NOTE • If you want to turn the Beeper off, simply repeat this process. 24 How to use washer I Tub Clean ( ) Tub Clean is a special cycle to clean the inside of the washing machine. A higher water level is used in this cycle at higher spin speed. Remove any clothing or items from the washer and close the door. Open the dispenser drawer and add Anti limescale(e. g. Power On and then touch and hold Tub Clean button for 3 seconds. [. . . ] The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. NOTE • When disposing of the appliance, cut off the mains cable, destroy the plug and disable the door lock to prevent children being trapped inside. What Is Not Covered: • Service trips to your home to teach you how to use the product. • If the product is connected to any voltage other than that shown on the rating plate. • If the fault is caused by accident, neglect, misuse or Act of God. [. . . ]