User manual LG FRS640D3F01

[. . . ] Use of controls or performance of procedures other than those specified herein may result in hazardous radiation exposure. WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture Industry Canada requirement This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. FCC COMPLIANCE STATEMENT Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] • Please pay attention to handling Electrostatic Sensitive Devices, you may use anti-static products such as wrist straps, heel straps, mats to protect your body from electrostatic. 2 System Environment Operating Environment This unit can be operated in the system environment explained here. • CPU : Intel Core 2 Duo E6750 (2. 66 GHz), AMD Phenom 9450 (2. 10 GHz) or above. • O/S : Windows 8, Windows 7, Vista, XP SP3. • RAM : 2 GB or more • HDD : Needed free space for Blu-ray Disc authoring (BD-R SL/DL: 60 GB, BD-R/RE XL (3 Layer): 100 GB, BD-R XL (4 Layer): 128 GB) Serial ATA Interface Drive bay 13. 34 cm (5. 25-inch) half-height bay required Power +5V/+12V power socket required Recommended BD-R SL : Sony, Panasonic. BD-RE SL : Mitsubishi Kagaku Media, Verbatim, Sony. DVD-R :Mitsubishi Kagaku Media, Verbatim. DVD-RW : JVC, Mitsubishi Kagaku Media, Verbatim. DVD+R : Mitsubishi Kagaku Media, Verbatim. DVD+RW : Mitsubishi Kagaku Media, Verbatim. DVD±R DL : Mitsubishi Kagaku Media, Verbatim. M-Disc (DVD+R SL) : Millenniata CD-R : Mitsubishi Kagaku Media, Verbatim, Taiyo Yuden. CD-RW : LG, Mitsubishi Kagaku Media, Verbatim. While this Blu-ray Disc Rewriter can read DVD-video or BD-MV(BD-ROM) discs, decoding them to display on your pc’s monitor requires separate MPEG, H. 264 or VC-1 decoding that is done by separate hardware (either an MPEG, H. 264 or VC-1 decoder card or MPEG, H. 264 or VC-1 decoding done by your video card), or separate software that you install to do MPEG, H. 264 or VC-1 decoding. For further details, refer to the documentation that comes with MPEG, H. 264 or VC-1 software. Location and Function of Controls Front Panel Rear Panel 1 2 3 4 1 2 1. Drive activity indicator The LED is used to indicate the operation of Writer. 1. Eject Button 4 Installing the Drive Before installing the drive, please note the following points. ■ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the SATA cable. Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets. Discharge any static electricity on your person by touching the computer covers, etc. ■ ■ Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp edges inside the computer so take care to avoid injury. Mounting the Drive 1. Remove the a 51/4″ drive bay panel from the computer. [. . . ] (label up) • Is the drive installed in the correct orientation?• Was the drive or disc moved from a low temperature environment to a high temperature environment?(There is a possibility of condensation on the lens in the drive or on the surface of the disc. ) • • When you call for service, be prepared to give as much information as possible of your system, environment, and the specific problem. Were there any error messages displayed? [. . . ]