User manual LG HT902TB

[. . . ] Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. [. . . ] If you forget your password If you forget your password, you can clear it using the following steps: 1. Input the 6-digit number "210499" and press ENTER. Select the first character using v / V buttons. Press B and select the second character using v / V buttons. Press ENTER to confirm your Area code selection. OTHERS OTHERS PBC DivX(R) Registration On Select Move Select PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. DivX(R) Registration We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www. divx. com/vod. Select "DivX(R) Registration" option and then press B. Press ENTER while "Select" is selected and the registration code will appear. Time Search DVD VCD DivX This receiver memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. Note: This receiver does not memorize the scene of a disc if you switch off the receiver before commencing to play the disc. System Select You must select the an appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold X on the front panel or PAUSE/STEP (X) remote control for more than 5 seconds to be able to select a system (PAL, NTSC). When the selected system is not compatible with the system of your TV, normal colour picture may not be displayed. NTSC: Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. To start playing at any chosen time on the disc: 1. Press v / V to select the time clock icon and "--:--:--" appears. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. [. . . ] · Connect the speakers and components securely. · Move your TV away from the audio components. · The TV is not set to receive DVD signal output. · The video cable is not connected securely. · The connected TV power is turned off. There is no sound or only a very low-level sound is heard. [. . . ]