User manual LG L1730SF

[. . . ] The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily accessible after installation. Operate the display only from a power source indicated in the specifications of this manual or listed on the display. If you are not sure what type of power supply you have in your home, consult with your dealer. [. . . ] Remove the tape. <Image 1> Put the set as the picture below <Image 1> to remove the tape. <Image 2> Do not remove the tape with the set up side down as the <Image 2> The base part may spring up to injure your hand. 2. Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -20°~140° 140° -20° Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. Height Range : maximum 2. 41inch (61. 3mm) Landscape & Portrait : You can rotate the panel 90o clockwise. (* For detailed information, please refer to the Pivot Sofeware CD provided. ) * Make sure not to touch the floor when the head rotates to use the Pivot function. 4 Connecting the Display Using the Computer 1. When attached, tighten the thumbscrews to secure 2. Connect the power cord into a proper power outlet that is easily accessible and close to the display. NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. the connection. Power Cord Signal Cable D-sub Wall-outlet type Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the SET/AUTO function button to improve resolution. 5 Connecting the Display To Use Touch Screen Select and Install the driver CD provided. Make sure you have the driver installation CD bundled with the product. ITM DRIVER 1) Connect the USB cable for touch screen before installing the driver. 2) Insert the ITM touch screen driver installation CD. 3) See the touch screen software installation CD for more information and assistance. * The software drivers support the following Microsoft Windows operating systems: Windows 2000, XP, VISTA. Hantouch DRIVER 1) Connect the USB cable for touch screen before installing the driver. If you make an adjustment and then wait for the OSD to disappear, the adjustment will also been saved. 10 On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu PICTURE Sub menu BRIGHTNESS CONTRAST GAMMA COLOR PRESET sRGB 6500K 9300K RED GREEN BLUE POSITION HORIZONTAL VERTICAL TRACKING CLOCK PHASE SHARPNESS SETUP LANGUAGE HORIZONTAL OSD POSITION VERTICAL Reference To adjust the brightness, contrast and gamma of the screen To customize the color of the screen To adjust the position of the screen To improve the clarity and stability, sharpness of the screen To customize the screen status for a user's operating environment WHITE BALANCE POWER INDICATOR FACTORY RESET SET ID FLATRON F-ENGINE MOVIE / TEXT USER NORMAL To select or customize desired image settings : Adjustable NOTE The order of icons may differ depending on the model (11~15). 11 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Menu Name PICTURE Icons Sub-menus Button Tip MENU : Exit - + : Adjust (Decrease/Increase) SET : Enter : Select another sub-menu NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. 12 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description PICTURE PICTURE BRIGHTNESS CONTRAST GAMMA To adjust the brightness of the screen. : -50/0/50 On the monitor, high gamma values display whitish images and low gamma values display high contrast images. MENU : Exit - : Decrease + : Increase SET : Select another sub-menu COLOR PRESET COLOR Select the screen color. · sRGB: Set the screen color to fit the sRGB standard color specification. Set your own blue color levels. RED GREEN MENU : Exit BLUE - : Decrease + : Increase SET : Select another sub-menu POSITION POSITION HORIZONTAL VERTICAL To move image left and right. Menu Name Icons Sub-menu Name button on the front of the FLATRON F-ENGINE When you execute F-ENGINE, two tone will appear on the screen as shown in the picture. The applied screen will appear on the left side, whereas the nonapplied screen will appear on the right side. Press the SET button to use the adjusted screen. Screen when applied Screen when not applied Main menu Sub menu Description MOVIE This feature lets you easily select the best image TEXT setting, which is optimized to the environment (ambient illumination, image types, etc. ). MENU : Exit - , + : Move SET : Select USER MOVIE: For animation images in videos or movies. TEXT: For text images (Word processing, etc. ) User You can manually adjust the brightness, ACE or RCM. You can save or restore the adjusted value even when in a different environment. . . . To adjust the USER sub-menu function, Press the SET Button USER BRIGHTNESS ACE (Brightness): Adjusts screen brightness. . . . ACE (Adaptive Clarity Enhancer): Selects the clarity mode. [. . . ] Make sure your PC and accessories are USB-enabled. 18 Specifications Display 17 inches (43. 2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 43. 2 cm 0. 264 mm pixel pitch Horizontal Freq. Input Form 30 - 83kHz (Automatic) 56 - 75Hz (Automatic) Separate Sync Composite Sync SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0. 7Vp-p/75ohm) VESA 1280 x 1024@75Hz VESA 1280 x 1024@60Hz : 35W 2W 1W Full Up Position Folded Position Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight (with tilt stand) Signal Input Input Form Max Recommend DDC 2B On Mode Sleep Mode Off Mode Width Height Depth Net 39. 80 cm / 15. 67 inches 39. 00 cm / 15. 35 inches 22. 80 cm / 8. 98 inches 6. 7 kg (14. 77 lbs) -20°~140° (Head) 2. 41inch (61. 3mm) 90° clockwise 39. 80 cm / 15. 67 inches 11. 76 cm / 4. 63 inches 32. 90 cm / 12. 95 inches Range Tilt Height Rotate Power Input Environmental Conditions AC 100-240V~ 50/60Hz 1. 0A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature Humidity -20°C to 60 °C 5 % to 90 % non-Condensing Tilt Stand Power cord Attached( O ), Detachable ( ) Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. 19 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (Hz) 1 2 3 4 5 6 7 8 9 10 11 *12 13 VGA VGA VGA VESA VESA VESA MAC VESA VESA MAC VESA VESA VESA 640 x 350 720 x 400 640 x 480 640 x 480 800 x 600 800 x 600 832 x 624 1024 x 768 1024 x 768 1152 x 870 1152 x 900 1280 x 1024 1280 x 1024 31. 469 31. 468 31. 469 37. 500 37. 879 46. 875 49. 725 48. 363 60. 023 68. 681 61. 805 63. 981 79. 976 70 70 60 75 60 75 75 60 75 75 65 60 75 *Recommend Mode Indicator MODE LED Color On Mode Sleep Mode Off Mode Green Amber Off 20 Controlling the Multiple Monitors Use this method to connect several monitors to a single PC. You can control several monitors at a time by connecting them to a single PC. Connecting the cable Connect the RS-232C cable as shown in the picture. [. . . ]