User manual LG LAC-M1600

[. . . ] Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. [. . . ] The indicator lights up in the following order. TUNER CD AUX TUNER. . . Note You cannot select a source if a CD is not inserted. Adjusting the volume Rotate MUTE/PWR (Press VOLUME on the remote control) to adjust the sound level. Note When you turn the unit off, the current volume level is automatically memorized. Whenever you turn the unit back on, it will operate at the memorized volume level. Mute 1 2 Press MUTE/PWR (POWER/ sound. on the remote control) to cut the Checking the clock You can see the clock pressing DISP (DISP. on the remote control). Note · If the unit is receiving RDS broadcasting with CT (Clock Time ) information, the clock will be shown automatically in the display window . · Unless, "NO CLOCK" appears in the display window. 11 Basic operation Changing the general settings 1 2 Press and hold MENU (Press and hold MENU/SEL on remote control) so that one of menu items appears. Press MENU (MENU/SEL on remote control) to scroll between menus. AF ON t REG ON t TA ALARM t PI SOUND tAUX ON t AUX 00DB t DEMO OFF t BEEP 2ND Rotate MUTE/PWR clockwise or unclockwise to select one of the settings specified belows. (Press VOLUME on the remote control. ) Press and hold MENU (MENU/SEL on remote control) to finish the setting. AF(Alternative frequency) ON / OFF When the reception quality worsens, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. AF ON : Wherever you drive, you can continue to listen to the same program without interruptions. on the remote control) until "MANUAL" appears, and then press it repeatedly. The frequencies move up or down step by step. Storing and recalling broadcast frequencies You can easily store up to 6 broadcast frequencies for later recall at the touch of a button. 1 2 3 Press BAND to select desired band you want to store. Press one of preset buttons 1-6 and hold until the beep sound. The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. Repeat steps 1-3 to preset other stations. The next time, you press the same preset button, the radio station frequency is recalled from the memory. 4 Note · Up to 18 FM stations, 6 for each of three FM bands and 6 MW(AM) stations can be stored in the memory. · When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased. Auto search memory This function lets you automatically store the 6 strongest broadcast frequencies. 1 Press U/AS until "A/S" appears. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength. [. . . ] In a WMA Content, information about the file (Song title/ Performer name) is recorded. If there is no information, "NO TEXT" will be shown in the display window. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. To go to a particular quickly (+10/-10 steps) (If there is no folder or one folder. ) MP3 WMA U u Press U/AS (U on remote control) to skip to the next 10 track, and press u/PS (u on remote control) to skip to the previous 10 track. To skip to the next or previous folder (If there are more than two folders. ) MP3 WMA U u Press U/AS (U on remote control) to skip to the next folder, and press u/PS (u on remote control) to skip to the previous folder. Note Time display appearing on the display part when playing VBR file may vary and there may be some difference from actual time (both progress time and VBR are displayed at the same time when playing file). 18 AUX operation Playing an Auxiliary Equipment You can connect Auxiliary Equipment to this unit. Connect one to the external device jack using the line input cable (not supplied), and the other to the AUX IN input jack on the control panel. Auxiliary input Line input cable MP3 Player, etc 1 2 3 Press SOURCE to select the AUX as source. [. . . ]