User manual LG LAC-M5651EK

[. . . ] There are no user-serviceable parts inside. Refer servicing to qualified service personnel. Warning: To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. Warning: Due to high temperature outside of the unit, please use the unit only installed in a car. CAUTION: This unit employs a Laser System. [. . . ] The mode indicator lights up in the following order. Turn left or right CONTROL UP/DOWN to adjust the sound quality. Turn right Turn left Decrease the volume level. Decrease the level of the right speaker(s). Decrease the level of the rear speaker(s). Decrease the level of the left speaker(s). Decrease the level of the front speaker(s). VOL BAS TRB BAL FAD 1. Press EQ/XDSS on the front panel to select the equalizer. Press EQ/XDSS repeatedly to choose between the following Equalizer settings. POP CLASSIC ROCK JAZZ VOCAL FLAT (NO display) POP. . . . MUTE 1. To cancel it press MUTE again. (or any other button on the front panel. ) NOTE The unit cannot adjust the bass and treble in the EQ/XDSS on mode. XDSS (Extreme Dynamic Sound System) XDSS ON : Press and hold the EQ/XDSS button to reinforce treble, bass and surround effect. XDSS OFF : To cancel it press and hold EQ/XDSS again. 9 RDS Operation RDS Display Options In normal RDS operation the display will indicate the station name. Pressing DISP on the front panel enables you to cycle through the various data types in the sequence: (FREQUENCYtPTYtRTtPS) · PTY (Program type recognition) · RT (Radio text recognition) · PS (Program Service name) · PI (Program Identification) · AF (Alternative Frequencies for the actual program) · TP (Traffic Program Identification) · TA (Traffic Announcement Identification) · EON (Enhanced Other Networks) NOTES · RDS is only available for FM reception. RDS AF/REG FUNCTION To switch on or off the AF function (Network-Tracking), shortly press the `AF' button. To switch on or off the REG function (Regional Network Tracking), long press the `AF' button more than 2 seconds). LOCAL/DX selection in EON-TA mode In the EON-TA mode, pressing the TA button for more than 2 seconds, causes only local and strong stations to be received. When the TA button is pressed for more than 2 seconds, it receives all stations, including distant and weak ones. It is recommended to set the TA button to the local position to receive local stations with good sound quality. 10 RDS Operation RDS MODE Adjustment 1. Press the SOUND OPT. MENU button for more than 1. 2 seconds it is activated selecting mode. After, pressing SOUND OPT. MENU button repeatedly for selecting. Turn left or right CONTROL UP/DOWN to select the indicator. TA SEEK mode When the newly tuned station does not receive TP information for 5 sec, the receiver retunes to the next station which has the same PI as the last station's, but has the TP information. TA ALARM mode When a newly tuned station has no TP information for 5 sec, a double beep sound is ouput. [. . . ] We recommend that you use "Easy-CD Creator" which creates an ISO9660 file system. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. [. . . ]