User manual LG LAD-9700R

[. . . ] LAD9700R_ENG_ESSE_MFL41634260 LAD9700R ENGLISH AV Multimedia System Read the manual carefully before using the unit. Safety notes CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with the arrowhead symbol, within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Always operate the vehicle in a safe manner. [. . . ] The "SETUP" screen appears. 5. Input the PIN code (1234) in your phone when the pop-up screen is displayed on the screen. When it is successfully connected, the "This phone is connected. " pop-up screen appears and then the mark is displayed in the "CONNECT PHONE" screen. 2. The "CONNECT PHONE" screen appears. When it is not connected, the connection failure message appears and then the screen moves to the "CONNECT PHONE" screen. Notes · Before connecting, check the PIN code settings. Refer to "Changing the PIN code" on the page 30. · This may not connect using the unit settings depending on the type of phone. Connect using the phone settings. 24 Bluetooth operation To connect using the phone settings Your phone's Bluetooth feature may be set to off by default. To use the Bluetooth feature, Bluetooth must be turned on in your phone. Enable the phone's Bluetooth component. This might be in a menu called Settings, Bluetooth, Connections, or Hands-free. Initiate a search for Bluetooth devices. These settings might be located in a menu called Bluetooth, Connections, or Handsfree. Select the your device from the list of phone. Input the PIN code (1234) in your phone. When it is successfully connected, the "This phone is connected. " pop-up screen appears and then the mark is displayed in the "CONNECT PHONE" screen. · Unlike the hands-free functionality, Headset connection will allow only two functions "answering calls" and "making a call from the latest call". Also the caller's number is not displayed when answering calls. · If connecting through LAD9700R, initiate the hands-free connection first. If your Bluetooth phone does not support the hands-free connection, then initiate the headset connection. · If connecting through a Bluetooth phone, the hands-free connection or headset connection may not operate depending on the type of the phone. Disconnecting/Connecting again the bluetooth phone 1. And then touch . Your phone is disconnected and the mark disappears. Notes · When you connect the headset in your phone, icon is displayed on the upper right side. [. . . ] The unit does not operate correctly even when the appropriate remote control buttons are pressed. Connect the cables correctly. The volume level is low. This unit is not firmly secured. Adjust the volume. Secure this unit firmly. Battery power is low. Some operations are prohibited with certain discs. Load new battery. [. . . ]