User manual LG LE1004-NH

[. . . ] Digital Video Recorder Use Manual Model: LE1004 Keep this user manual where it can be always spotted. Read the safety precaution before using the product. The product warranty is included with user manual. Please follow the directions safely use the product. The purpose of the following safety precaution is to prevent any unexpected risk or damage by using the product accurately as intended. Warning  Turn off the power of the product before installing the product. Do not plug many plugs into one outlet - It can cause an electric shock or a fire. [. . . ] BPS : Bit rate Per Second for data transmission. Default value of BPS is ‘9600’ Value can be selected by camera setting: (1200/ 2400/ 4800/ 9600/ 19200/ 38400/ 57600/ 115200 bps) E. DWELL TIME : This is time interval before moving to next preset position when touring. Select one from 5 seconds, 10 seconds, 20 seconds, 30 seconds, 1 minute, 3 minutes and 5 minutes. The default is 1minute. Notice Basically, DVR support one RS-485 port for PTZ connection. 2-15 Chapter 2 Functional description 3) Event You can specify the processing when event occurs like sensor, motion detection, video loss, and the email notification settings when event occurs. ① ② ③ ④ ① [Sensor]  You can specify the processing when event occurs from input device. A. (Normal Open) : The type of input device is opened normally. (Normal Close) : The type of output device is closed normally. ALARM : Setting alarm out when event occurs from input device. (ON/OFF) 2-16 Chapter 2 Functional description D. ALERT : Setting sound a buzzer when event occurs from input device. ② SPOT-OUT : Setting spot out when event occurs from input device. (ON/OFF) DURATION : Setting the duration time from event occurs. ( 1~10 Sec. , OFF) [Motion detection]  You can specify the process when motion is detected. Functional description A. CHANNEL : Selecting camera which is associated event. MOTION ZONE : Setting the motion detection zone. Click “SET” button to setting motion detection zone. - Click right button of mouse on the screen to display menu window. 2-17 Chapter 2 Functional description - SELECT ALL : Selecting entire area. SAVE : Saving selected area as a motion detection zone. EXIT : Exiting motion zone setting. C. SENSITIVITY : Setting the motion sensitivity. ALARM : Setting alarm out when motion is detected. ALERT : Setting sound a buzzer when motion is detected. SPOT-OUT : Setting spot out when motion is detected. G. DURATION : Setting the duration time from motion detection occurs. ③ [Video loss]  You can specify the processing when video loss. A. [. . . ] Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. DO NOT STARE INTO BEAM. To disconnect power from mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. • This Class A digital apparatus complies with Canadian ICES-003.  This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. [. . . ]