User manual LG LH-RH9506TA

[. . . ] LH-RH9506TA_NA3NLLD_ENG HDD/DVD Recorder Receiver System OWNER'S MANUAL MODEL:LH-RH9506TA (Main Unit: LH-RH9506S Speakers: LHS-95TA9S, LHS-95TA9C, LHS-95TA9A) CD-R/RW Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. [. . . ] Press MARKER again to cancel the marked file/track or folder. Repeat step 1 to mark additional file/track (folders). The options appear on the left side of the menu. Use v / V to select the [Program Add] option then press ENTER. Repeat steps 1-3 to mark additional tracks. Note: If you select a folder for Programmed Playback, all tracks/files in the folder are added to the Program List. 2. Use v / V to select an option then press ENTER to confirm your selection. [Play] Playback begins in the order in which you programmed the tracks from the selected track. [Delete] Deletes the track(s) from the Program List menu. [Move] Moves the track(s) to change the program order. (HDD only) Repeat Programmed Tracks Press REPEAT to select the desired Repeat mode. [ALL] Repeats all tracks on the Program List. [OFF] Cancels Repeat mode (no display). Erasing a Track from the Program List 1. Select the track you wish to erase from the Program List. Use MARKER button to select multiple tracks. Select [Delete] option then press ENTER. Changing Track Order in the Program List 5. The programmed track you selected last is highlighted on the program list. Use v / V to select the track you want to start playing. Playback stops after playing the last programmed track in the program list. To exit Program Playback and resume normal playback, select a track on the List and press PLAY (B). Tip: You can access or remove the Program List screen by pressing MENU/LIST. Select the track you wish to move on the Program List. [. . . ] See "Changing TV audio channel" on page 47. Point the remote control at the remote sensor of the recorder. Replace the batteries with new ones. Cannot record or did not record successfully. The remaining blank space on the disc is insufficient. The source you are trying to record is copy protected. [. . . ]