User manual LG LH-T550TB

[. . . ] 4 Set Auto Tuning following screen instructions. ✎✎ If Input Source is not connected properly, programme registration may not work. ✎✎ Auto Tuning only finds programmes that are currently broadcasting. ✎✎ If Lock System is turned on, a pop-up window will appear asking for password. ❐❐To use Manual Tuning SETTINGS ➾ SETUP ➙ Manual Tuning Adjusts programmes manually and saves the results. [. . . ] 3 In SIMPLINK Setting window, sets SIMPLINK function to ON. 4 In SIMPLINK menu window, selects the device you want to control. ✎✎ This function is only compatible with devices with the SIMPLINK logo. ✎✎ To use the SIMPLINK function, you need to use a high-speed HDMIⓇ cable (with CEC (Consumer Electronics Control) feature added). 13 pin connected for information exchange between devices. ✎✎ If you switch to another input, the SIMPLINK device will stop. ✎✎ If a third-party device with the HDMI-CEC function is also used, the SIMPLINK device may not work normally. ✎✎ [Depending on model] If you select or play media from a the device with a home theatre function, the HT Speaker is automatically connected. Be sure to connect with an optical cable (sold separately) to use the HT Speaker function. ❓❓SIMPLINK function description • Direct Play: Plays the multimedia device on the TV instantly. • Block Programme : Blocks programmes with content inappropriate for children. Programmes can be selected but the screen is blank and the audio is muted. To watch a locked programme, enter the password. • Parental Guidance : This function operates according to information from the broadcaster. TV turns itself off and back on, and all settings are reset. ✎✎ When Lock System is in place, a pop-up window appears and asks for password. ✎✎ Do not turn off the power during initialization. ❐❐To view 3D images 3D imaging is a technology that utilizes the slight difference between the left and right eyes to make images on TV look just like real-life three-dimensional space. 1 Play a 3D image title or turn to a 3D channel. 3 Press 3D button to change to 3D imaging. 4 To end 3D image viewing, press the 3D button on the remote control while viewing 3D images. ❐❐To adjust details of 3D images Press the 3D OPTION button. Changes 3D image viewing options. • 3D Picture Correction : Flips left/right images. • 3D Depth : Adjusts depth between an object and its surroundings. • 3D Viewpoint : Adjusts 3D depth between an object and its surroundings by moving the 3D image screen back and forth. ❐❐Viewing 3D images - warning ✎✎ When viewing 3D images, it is recommended that you maintain a distance of at least twice the screen's diagonal length. ✎✎ 3D images may not be viewed correctly with shutter-type glasses that require recharging. ✎✎ If a future 3D broadcasting format that is not supported by this TV becomes the standard, you may require an additional device such as a set-top box. ❐❐Using 3D glasses - warning ✎✎ Do not use the 3D glasses as a replacement for your own corrective glasses, sunglasses, or protective goggles. [. . . ] There may be no malfunction. ❐❐Operational problems ꕢꕢ Cannot view certain programmes. • Adjust the location or orientation of the antenna. • Save the programmes you wish to view using Auto Tuning or Programme Edit. ꕢꕢ There is a delay after the TV is switched on before the image is fully visible. • This is normal. Any delay is due to an image deletion process which cleans up image noise that may occur when the TV is first switched on. ❐❐Image problems SETTINGS ➾ Customer Support ➙ Picture Test Run an Picture Test first to verify that the image signal output is normal. If there is no problem with the test image, check connected external devices and the broadcast signal. [. . . ]