User manual LG LS902P

[. . . ] Color Video Camera Instruction Manual Models : LS903 LS902 LS901 Before installing, operating or adjusting this product, please read this instruction booklet carefully and completely. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] Use this button to select an item or adjust the parameters. Down button: Moves the cursor downwards. Use this button to select an item or adjust the parameters. Right button: Moves the cursor to the right. Use this button to select or adjust the parameters of the selected item. The parameter changes each time this button is pressed. Left button: Moves the cursor to the left. Use this button to select or adjust the parameters of the selected item. The parameter changes each time this button is pressed. Set button: Executes selections and displays a mark. submenu for an item with the 21 Menu Operation To Open and Exit the Menu screen 1. or button to select the [EXIT] then use Use to select a mode. · · · RET: Return to the previous. TOP: Return to the CAMERA SETTING menu screen. or button C 2. Note: The setup menu will be disappear after save the current setting value. 22 Camera Identification Settings Camera Identification Setting You can use the camera identification (CAMERA ID) to assign a number to the camera. Select [CAMERA ID] option on the [CAMERA SETTING] menu. Use or to select a CAMERA ID (OFF, 1-255). 23 Exposure Settings You can set the exposure options using the EXPOSURE menu. Select [EXPOSURE] option on the [CAMERA SETTING] menu. Press button and the EXPOSURE menu appears. E WDR/BLC setting Use WDR/BLC option to set the options for BLC or WDR camera. Use · · · or button to select a mode then press . WDR LIMIT: LOW y MIDDLE y HIGH BLC LIMIT: LOW y MIDDLE y HIGH BLC: Set the BLC limit. HSBLC: Use for adjusting brightness the specific area of picture. [. . . ] Use · · or button to select [INT] or [LL] (Line Lock). INT: Selects for using the internal synchronization. LL (Line Lock): Selects for the operation of multi cameras because it synchronizes the camera phase by using the external signal (AC Signal). A little phase deviation for some sets may be aligned. 35 Special Menu Settings Setting the USER TITLE You can use the camera identification to assign a number and character to the camera (0 - 9, A-Z, a-z). [. . . ]