User manual LG LT713P-B

[. . . ] OWNER'S MANUAL Dome Camera Please read this manual carefully before operating your set and retain it for future reference. MODELS LT913 Series LT713 Series P/NO : MFL66281613 2 Safety Information 1 Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. [. . . ] Executes selections and displays a submenu for an item with the mark. PRESET /CAM1 3. Press [Cam OSD] button to display the camera setup menu. At this point, you have access to the camera setup menu. General operation 1. Use [In] or [Out] button to select an option then press [Open] or [Close] button. Use [In] or [Out] button to select a submenu option. Use [Near] or [Far] button to select a value. Select [RETURN] option then press [Open] or [Close] to return to the previous menu. Press [Cam OSD] button to exit the setup menu. 4 Operation FOCUS NEAR button FOCUS FAR button Open/Close(Enter) buttons Accessing the camera setup menu To access the setup menus using the keys on a LKD1000 controller, do the following: 1. Select CAM (Camera) icon in the main menu and then press ENTER. The camera ID input menu will be displayed. CAM Please Enter Camer IDID Please Enter Camera Target CAM ID Target CAM ID ::__ Operation 37 Camera menu settings Focus setting The camera adjusts the focus automatically by sensing the center of the picture. Focus Distance setting Selects the minimum shooting distance for the focus. Select [FOCUS DIST] option on the [FOCUS] menu, then select a focus distance value. Exposure settings v v 4 Operation Focus mode · · Iris setting Select [FOCUS MODE] option on the [FOCUS] menu, then select the following mode. AUTO: Auto-focus is activated automatically. MANUAL: Focus is activated automatically after the zoom movement is finished. If you want to control the focus manually, press the FOCUS (NEAR or FAR) buttons on the controller. ONE PUSH: The focus is activated manually. If the camera is received auto-focus command, the camera is activated auto-focus mode and the focus is set automatically and then the focus mode is automatically changed to manual mode. ZOOM TRIG: The focus is activated manually. If you change the zoom, the focus is activated automatically and then the focus mode is automatically changed to manual mode. Select the desired lens iris value for camera exposure. Select [IRIS] option on the [EXPOSURE] menu, then select a value. · · AUTO: The lens iris is set automatically. MANUAL: Use [Near] or [Far] button to select the DC Iris level. DC Iris level are set by one parameter unit. · AGC (Automatic Gain Control) setting If the images are too dark, change the maximum [AGC] value to make the images bright. [. . . ] Select [RETURN] option and press [Open] or [Close] button to exit the setting menu. LANGUAGE Setting Select a language for the setup menu and OSD display. v 4 Operation Alarm In setting 1. Select one of the alarms in option on the [ALARM SET] menu. Use [Near] or [Far] button to set it [ON]. Select [NORMAL] option and select [Open] or [Close] option. [. . . ]