User manual LG M2062DP

[. . . ] User's Guide E1940T E2040T E2240T E2340T E1940S E2040S E2240S E2340S Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. [. . . ] When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) Power Button NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 7 Connecting the Display Connecting with the PC E1940S/E2040S/E2240S/E2340S 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1 system, and other attached devices is turned off. and power cord of the signal cable. A Connect D-sub(Analog signal) Cable 2 in order, then tighten the screw NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. A Wall-outlet type OR Wall-outlet type 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power Button NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO function button to improve resolution. 8 Control Panel Functions Front Panel Controls E1940T/E2040T/E2240T/E2340T MENU Button OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. MODE Button Use this button to enter F-ENGINE, ORIGINAL RATIO, PHOTO EFFECT menus. For more information, refer to page 20. 9 Control Panel Functions AUTO Button AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO button before entering the On Screen Display(OSD). (Only Analog Mode) This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is E1940T : 1360 x 768 E2040T : 1600 x 900 E2240T/E2340T : 1920 x1080 INPUT Button (SOURCE Hot key) When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. The default setting is D-Sub. EXIT Button Exit the OSD(On Screen Display). Power Button & Use this button to turn the display on or off. Power Indicator The power indicator stays white if the display is running properly (On Mode). [. . . ] packing) Range Power Input AC-DC Adapter Tilt : -5° to 15° 12 V 2. 0 A Type ADS-24S-12 1224G*, manufactured by HONOR Electronic or type MU24-B120200-xx, manufactured by LEADER Electronics or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic Environment al Conditions Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Stand Base Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 27 Specifications Display 47. 0 cm (18. 5 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47. 0 cm 0. 300 mm x 0. 300 mm (Pixel pitch) Horizontal Freq. Input Form Signal Input Input Form Max Recommend DDC 2AB On Mode Sleep Mode Off Mode : 14 W(Typ. ) 1W 0. 5 W 30 kHz to 61 kHz (Automatic) 56 Hz to 75 Hz (Automatic) Separate Sync. 15 pin D-Sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz E1940S Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight With Stand Width 46. 34 cm (18. 24 inch) Height 37. 39 cm (14. 72 inch) Depth 17. 40 cm (6. 85 inch) Weight(excl. packing) Without Stand Width 46. 34 cm (18. 24 inch) Height 30. 20 cm (11. 89 inch) Depth 4. 3 cm (1. 69 inch) 2. 4 kg (5. 29 lb) Range Power Input AC-DC Adapter Tilt : -5° to 15° 12 V 2. 0 A Type ADS-24S-12 1224G*, manufactured by HONOR Electronic or type MU24-B120200-xx, manufactured by LEADER Electronics or type ADS-24NP-12-1 12024G, manufactured by HONOR Electronic Environment al Conditions Operating Conditions Temperature 10 °C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20 °C to 60 °C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Stand Base Power cord Wall-outlet type NOTE Information in this document is subject to change without notice. 28 Specifications Display 50. 8 cm (20. 0 inch) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50. 8 cm 0. 2766 mm x 0. 2766 mm (Pixel pitch) Horizontal Freq. [. . . ]