User manual LG MS24AQ

[. . . ] To prevent direct exposure to laser beam, do not try to open the enclosure. CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. [. . . ] Contact office for compliance of this product : LG Electronics Inc. EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands yy Please note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product. This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Disposal of your old appliance 1.  When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2.  electrical and electronic products All should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3.  correct disposal of your old The appliance will help prevent potential negative consequences for the environment and human health. 4.  more detailed information about For disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. SB16W-A0P_AESPLLK_ENG. indd 4 2013-05-03 10:47:04 Table of Contents 5 Table of Contents 1 Getting Started 4 Troubleshooting 12 Troubleshooting 1 3 Safety Information 6 Accessories 6 Playable file Requirement 7 Front panel 5 Appendix 13 Specifications 14 Maintenance 14 –  Handling the Unit 14 –  Notes on Discs 14 Trademarks and Licenses 2 2 Connecting 8 8 8 9 9 9 9 9 9 Power Source –  Battery Installation –  AC Power Cord Connection Other Equipment Connection –  USB Connection –  Removing the USB Device from the unit –  Compatible USB Devices –  USB device requirement –  PORT. yy External HDD, Card readers, Locked devices, or hard type usb devices are not supported. yy USB port of the unit cannot be connected to PC. The unit can not be used as a storage device. 2 Connecting PORT. IN Connection Removing the USB Device from the unit 1. Choose a different function mode or press Z twice in a row. 2. Remove the USB device from the unit. Connect a output (earphone or line out) of portable device (MP3 or PMP etc) to the AUDIO input connector. Compatible USB Devices yy MP3 Player : Flash type MP3 player. D yy USB Flash Drive :  evices that support USB 2. 0 or USB 1. 1. yy The USB function of this unit does not support some USB devices. yy A warning that excessive sound pressure from earphones and headphones can cause hearing loss. SB16W-A0P_AESPLLK_ENG. indd 9 2013-05-03 10:47:09 3 Operating 10 Operating Basic Operations 1. Insert the disc (Label facing up. ) or connect the USB device to the USB port. 2. Select the CD or USB function by pressing USB /CD. 3. Select a file (or track) you want to play by pressing C/V. Press d/M During playback, press C or V to go to the next track/ file or to return to the beginning of the current track/ file. [. . . ] The programs are also cleared when the disc or USB device is removed, the unit is switched to power off or the function is switched to others. Radio Operations Listening to the radio 1. Select the radio function by pressing FUNCTION switch. 3. Select the radio station by using TUNING (-/+) dial. To turn off the radio Set FUNCTION switch to CD or PORT. IN, USB, to turn off your unit. 3 Operating Note , , Listening to music from your portable player The unit can be used to play the music from many types of portable player. 1. Connect the portable player to the PORT. [. . . ]