User manual LG NB2530A

[. . . ] ENGLISH OWNER’S MANUAL Woofer built-in sound bar Please read this manual carefully before operating your set and retain it for future reference. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO INNER PAGE OF BACK COVER. NB2530A NB2530A-NB. DGBRLLK_MFL67693361. indd 1 2013-05-09 4:39:25 1 Getting Started 2 Getting Started WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. [. . . ] This function automatically turns on/off the unit when you turn on/off the external device (TV, DVD Player, Blu-ray Disc Player, etc. ) connected to this unit by the optical cable. When turning on the unit by this function, Optical function is selected directly no matter what kind of function has been selected before turning off it. This function turns on or off each time you press AUTO POWER. Auto power down This unit will turn off itself to save electric consumption in the case were main unit is not connected to external device and is not used for 25 minutes. So does this unit after six hours since Main unit has been connected to other device using analogue input. But the unit can turns on automatically based on the [AUTO POWER] function you've set. Sleep timer setting Press SLEEP repeatedly to select the desired time period options (in minutes): LCD OFF (Display window off ) -> DIMMER (The display window will be darken by half ) -> Sleep timer value -> Display on In display window you see “LCD OFF” and the display window turns off . To check the remaining time, press SLEEP. To cancel the sleep function, press SLEEP repeatedly until “SLEEP 10” appears, and then press SLEEP once again while “SLEEP 10” is displayed. You can check the remaining time before the unit turns off . Press SLEEP the remaining time appears in the display window. 3 Operating Display AUTO POWER ON AUTO POWER OFF Operation AUTO POWER function is turned on. AUTO POWER function is turned off. yy This function is intentionally designed to turn off the unit after 1 minute of inactivity. If you did not connect external devices with optical cable or there is no digital audio signal going to the unit, the unit will turn off after 1 minute of inactivity if AUTO POWER function is turned on. yy Depending on the connected device by the optical cable, this function may not operate. yy Once AUTO POWER is set, the unit will start as OPTICAL mode automatically next time, no matter what kind of function you selected before. yy It is not available to turn on the unit by AUTO POWER function if you turn off the unit directly. yy AUTO POWER function is not supported on LG Sound Sync (Wireless) mode. Note , , Note , , NB2530A-NB. DGBRLLK_MFL67693361. indd 14 2013-05-09 4:39:30 Operating 15 LG Sound Sync With wired connection 1. Connect your LG TV to the unit by using an optical digital cable. You can control some functions of this unit by your TV's remote control with LG Sound Sync. It is compatible with the LG TV that is supported LG Sound Sync. Make sure of the LG Sound Sync logo on your TV. Controllable function by LG TV's remote control : Volume up/down, mute Refer to the TV's instruction manual for the details of LG Sound Sync. Make one of the following connections, depending on the capabilities of your equipment. 3 Operating yy You can also use the remote control of this unit while using LG Sound Sync. If you use TV's remote control again, the unit synchronizes with the TV. yy When the connections failed, make sure of the condition of the TV and power of it. yy Make sure of the condition of this unit and the connection in the cases below when using LG Sound Sync. [. . . ] All Rights Reserved. Cleaning the unit To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Bluetooth® wireless technology is a system which allows radio contact between electronic devices within a max. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. [. . . ]