User manual LG PF80G

[. . . ] Owner's Manual DLP PROJECTOR Please read the safety information carefully before using the product. PF80G www. lg. com (Brazil : www. lge. com) 2 LICENSE LICENSE Manufactured under license from Dolby Laboratories. “Dolby “and the double-D symbol are trademarks of Dolby Laboratories. ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. [. . . ] When Wi-Fi Direct is set to Off, if yy you set Miracast™/Intel’s WiDi to On, Wi-Fi Direct is automatically set to On. When you set the Miracast™ / Intel’s yy WiDi function to Off, Wi-Fi Direct returns to the previous setting. 1 Set Wi-Fi Direct to On. (If you do not 2 Enable the Wi-Fi Direct settings on the 3 A list of devices that can be device that you want to connect to. connected to the projector is displayed. 4 Select a device to connect. 5 Select Yes, when the connection 6 If the device that you want to connect accepts the request, Wi-Fi Direct is connected. request message appears. NOTE It yy is recommended to connect a laptop using Intel’s WiDi within close range. Though Intel’s WiDi can be yy connected without a wireless router, it is recommended to connect the wireless router first for optimal performance. You yy may not connect your projector to a non-LG Electronics device even when it is detected. It yy is recommended you to connect a device to a 5 GHz router. The yy response rate may vary depending on the user’s environment. For yy more information on the device you want to connect to, refer to its owner’s manual. To use the Miracast™/ Intel’s WiDi function You can view the screen of a device with Miracast™ and Intel’s WiDi technologies on your projector. Press the SETTINGS button on the yy remote control. Select NETWORK → Miracast™/Intel’s WiDi. you do not use it, please change it to Off. ) 1 Set Miracast™/Intel’s WiDi to On. (If ENTERTAINMENT 31 Tips for Network Settings Use a standard LAN cable (Cat5 yy or higher with RJ45 connector, 10 Base-T or 100 Base TX LAN port). Resetting your modem can cause yy network connection problems. To resolve the problem, turn the power off, disconnect and reconnect, and then turn the power back on. LG yy Electronics is not responsible for any network connection problems or any faults, malfunctions and errors caused by an network connection. A yy network connection may not work properly depending on the Internet service provider. A yy DSL modem is required for a DSL service; a cable modem is required for a cable service. Only a limited number of network connections may be available, and projector network setting may not be available depending on your contract with your Internet Service Provider (ISP). (If only one device is allowed per line and the PC is already connected, other devices cannot be used. ) Wireless networks can be subject yy to interference from other devices operating at a frequency of 2. 4 GHz (wireless phones, Bluetooth devices or microwave ovens). [. . . ] - This only applies to mobile phones that support MHL. - You can use the remote control for some applications. Disconnect the MHL cable from the projector when: yy - The MHL function is disabled. - Your mobile device is fully charged in standby mode. MAINTENANCE 67 MAINTENANCE Clean your Projector to keep it in optimal condition. Cleaning Cleaning the Lens If there is any dust or staining on the lens surface, you must clean the lens. [. . . ]