User manual LG RCT699H

[. . . ] ENGLISH OWNER’S MANUAL Digital & Analog DVD recorder/VCR player combi Please read this manual carefully before operating your set and retain it for future reference. RCT699H www. lg. com Getting Started Getting Started 3 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. [. . . ] 1. Press DISPLAY twice during playback. 3. Press a/d repeatedly to select a desired angle. The Camera Angle icon is displayed on the TV screen when alternate angles are available. Note , , 40 Operating Changing the Audio Soundtrack Press AUDIO then press a/d repeatedly during playback to hear a different audio language or audio soundtrack if available. Some discs feature both Dolby Digital and DTS soundtracks. There is no analog audio output when DTS is selected. To listen to the DTS soundtrack, connect this recorder to a DTS decoder via one of the digital outputs. See page 17 for connection details. Last Condition Memory This Recorder memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the Recorder or switch off the Recorder. If you load a disc that has the scene memorized, the scene is automatically recalled. yy Settings are stored in memory for use any time. yy This recorder does not memorize settings of a disc if you switch off the recorder before commencing to play it. Note , , Note , , Changing the Audio Channel With DVD-RW discs recorded in VR mode that have both a main and a Bilingual audio channel, you can switch between Main (L), Bilingual (R), or a mix of both (Main + Bilingual) by pressing AUDIO. 4 Operating 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multichannel audio from a home theater system. 1. Press DISPLAY twice during playback. The OnScreen Display appears on the TV screen. 2. Use s/w to select the Sound icon in the OnScreen Display. 3. Use a/d to select “3D SUR”. To turn off the 3D Surround effect, select “NORMAL”. Subtitles Press SUBTITLE then press a/d repeatedly during playback to see the different subtitle languages. Operating 41 Playing a VCR Preparation yy Before using the remote control, press the VCR button to select the device to be operated. yy Turn the TV on and select the video input source connected to the Recorder. yy Audio system: Turn the audio system on and select the input source connected to the Recorder. Tracking Control Auto Tracking The automatic tracking function adjusts the picture to remove snow or streaks. The AUTO TRACKING function works in the following cases: yy A tape is played back for the first time. yy Streaks or snow appear because of scratches on the tape. Manual Tracking If noise appears on the screen during playback, press either PR/TRK (s/w) on the remote control or PROG. (s/w) on the front panel until the noise on the screen is reduced. [. . . ] Scan up or down through memorized channels. Adjust the volume of the TV Sony Hitachi 2. Release the 1 (TV POWER) button to complete setting. Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. [. . . ]