User manual LG RHT599H

[. . . ] USER MANUAL Freeview+ DVD Recorder with HDD RHT599H LG RHT49X instructions. indd 1 2009-03-04 3:50:12 SAFETY AND WARNINGS Please carefully read this user manual before setting up the unit and retain for future use. WARNING: To reduce the risk of the unit over heating ensure the surrounding area is clear and well ventilated. WARNING: Cigarette smoke can damage this unit, DO NOT smoke around this unit. WARNING: DO NOT install this unit in a confined space such as a book case, rack or similar unit. WARNING: DO NOT install this unit on an uneven surface or area prone to vibration. BATTERIES CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN GENERAL WARNING: Risk of electric shock, DO NOT attempt to repair, service or modify this unit always refer servicing and maintenance to qualified service personnel. WARNING: Risk of exposure to radiation from class1/ class 3b visible and invisible laser beams. [. . . ] Channel scanning starts. PROGRESSIVE SCAN ] For high definition and compatible televisions only: · Set RES. button on front panel of Unit to 576p SWITCHING PROGRAM LIST ON CHANNEL EDITING SCREEN To switch to another program list (Digital, Analogue or Radio): a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Program Edit from middle panel c) Select Edit from right panel d) Press OK [ ]. e) Use [ ] to highlight title at top of program list. ] to select DIGITAL TV, ANALOG TV or RADIO. f) Use [ List is displayed. ADJUST PROGRAMMED CHANNELS To scan and set available channels automatically: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Program Edit from middle panel c) Select Edit from right panel d) Press OK [ ]. e) Select channel to edit f) Press OK [ ]. Option menu is displayed in left panel g) Select option required: · Favorite: Set highlighted channel as favorite · For Analogue channels only: · Delete: Delete channel from programmed channel list · Move: Change order of channels and corresponding button on remote control · Station Rename: change name of channel · Program Edit: Change settings of channel manually: · PR: Indicate channel position SETTING A FAVORITE CHANNEL To set a channel as a favorite: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Program Edit from middle panel c) Select Edit from right panel d) Press OK [ ]. e) Select channel to mark as favorite f) Press OK [ ] to highlight Favorite on left panel 18 LG RHT49X instructions. indd Sec1:18 2009-03-04 3:50:16 GENERAL SETTINGS g) Press OK [ ]. Program is set as favorite and FAV is displayed. While watching TV, press [FAV] and select a favorite channel to view. DISPLAYING SET UP MENU a) b) c) d) Press HOME [ ]. ] until Easy Menu is displayed Press [ Select SETUP Press OK [ ] to display set up menu ADDING A CHANNEL To add a channel manually to a program list: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Program Edit from middle panel c) Select Add Channel from right panel and press OK [ ] ] to select Digital or Analogue d) Use [ e) Press [ ] and select program number f) Press OK [ ] to confirm SETTING UP REMOTE TO CONTROL YOUR TV To operate your TV with Unit remote control: If your TV is listed in table below: a) Press and hold TV POWER [ ] c) Enter TV manufacturer code as follows: Manufacturer LG / GoldStar Zenith Samsung Sony Hitachi Code number [1] (Default) [2] [1 3 4] [6 7] [8 9] [4] MAIN GUIDE d) Release TV POWER [ ] button e) Switch TV back on if necessary After replacing batteries in remote control repeat steps (a) to (c). TV ASPECT To select aspects ratio of connected TV: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select TV Aspect from middle panel c) Select option in right panel: · 4:3 Letter Box for a standard 4:3 screen TV with wide picture and bands on upper and lower areas of screen. · 4:3 Pan Scan for a standard 4:3 screen TV with wide picture on entire screen, cutting off parts that do not fit. 19 LG RHT49X instructions. indd Sec1:19 2009-03-04 3:50:16 · 16:9 Wide for a wide-screen TV. d) Press OK [ ] to confirm KARAOKE SETTINGS To mix multi-channel karaoke DVD channels into normal stereo: a) Display set up menu (see Displaying Set Up Menu) b) Select audio options icon in left panel c) Select Vocal from middle panel d) Select option in right panel: · ON for mixed sound in stereo e) Press OK [ ] to confirm VIDEO OUTPUT FORMAT To change TV connection setting: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Video output format from middle panel c) Select from options in right panel: · Y Pb Pr if TV is connected to Component Output port on Unit · RGB if TV is connected to SCART port on Unit d) Press OK [ ] to confirm POWER SAVE MODE To select Power Save mode when power is turned off: a) Display set up menu (see Displaying Set Up Menu) a) Auto Programming is highlighted. Select Power Save Mode from middle panel a) Select ON or OFF option in right panel: a) Press OK [ ] to confirm Option not available when timer recording set. Power Save mode will not work while receiving encoded signals. INITIALIZATION To reset Unit to original factory settings (except for Rating, Password and Area Code), and to format HDD: a) Display set up menu (see Displaying Set Up Menu) b) Auto Programming is highlighted. Select Initialization from middle panel c) Select option in right panel: · Factory Set. [. . . ] Ensure the disc has been finalised (see page 26). There is no picture. Check the connecting cables between the unit and the TV. Check the Video Output Format in the SETUP menu is set to the appropriate item that conforms to your connection. You are playing a disc recorded in a colour system (PAL, NTSC, SECAM) that is different from your TV. Picture Noise Appears. The video signal from the external device is copyprotected. Check the screen resolution is compatible by pressing the RES Button. Cannot play a disc recorded on this unit on an other player. Check the disc format is compatible with the other player. [. . . ]