User manual LG RVF1000

[. . . ] OWNER'S MANUAL Video Conference System Please read this manual carefully before operating your set and retain it for future reference. MODEL RVF1000 P/NO : MFL66683302 1105 (V1. 5) 2 Safety Information 1 Safety Information 1 Safety Information CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. [. . . ] This option is activated when you set to manual in the [Time Server] setting menu. Date Format: Select the display format for date. Daylight Saving: Set the daylight-savings time. Press OK and then the daylight-savings time setting menu will be displayed. Mark up to set the daylight-savings function. After setting, the daylight-savings option is set to On. · Time Zone: Select the time zone for your system. Installation 29 Admin Settings If you select this, the password input window is displayed. To change the administrator settings, you should input the password. The default administrator password is "1234". Enter the password to display the administrator sub-menu options. Call Settings General 3 Installation · · · Maximum Call Time: Enter the Maximum Call Time from 1 minute to 99999 minutes. After the entered minutes, the system will lose the call automatically. Maximum Bandwidth: Select the maximum amount of network bandwidth to use for video call. Outgoing Protocol: Select the protocol to use when attempting to outgoing Call. If you select H. 323 or SIP, you can make a call selected value. If the far site user does not enable the same protocol, you can't connect to the far site. If you selected Auto, you are able to connect moderately with the far site setting. If H. 323 does not connect, a SIP call is attempted automatically. ) SIP Transport Protocol: Select the transport protocol to use during sip outgoing call. If you select TCP or UDP, you can make a SIP call with the selected value. If the far site user does not enable the same transport protocol, you can't connect to the far site. If you select Auto, you are able to connect moderately with the far site. · 30 Installation H. 323 This unit supports the H. 323 protocol for placing and receiving video and voice calls. This is used when a gatekeeper function is attempted. 3 Installation · · · H. 323 Name: Enter the name of the device used when making calls with H. 323 with the alphabet, numbers and special characters. E. 164 Name: Enter the name of the device used when making calls with E. 164. This name is used when users register in the gatekeeper server. [. . . ] 3) Connect a different PC to the same network and try to ping to your VCS IP address (e. g. ping 10. 177. 217. 22). · Try to disable / enable the web server menu via Setup. 1) Go to Setup > Admin > Network >Service > Web Server. 3) Go back to the Web Server setting, set to On and return to the main screen or try to turn the power off then back on again. The remote user is not able to hear your voice. · · Check microphone status (see page 24). [. . . ]