User manual LG S24AHP-ND6

[. . . ] · Young children should be supervised to ensure that they do not play with the appliance. êìëëäàâ üáõä MODELS: S07LC S07LH S09LC S09LH S12LC S12LH S18LC S18LH S24LC S24AHP-ND6 S07LHG S09LHG S12LHG S18LHG S24AHP-ND6G Prior to installation, this air-conditioning unit must be submitted for approval by the utility service which provides electricity (EN 61000-3 Norm). Safety Precautions Safety precautions Safety Precautions Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Caution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 To prevent injury and property damage, follow these instructions. Incorrect operation due to ignoring instructions will cause harm or damage, the seriousness of which is indicated by the following symbols. Operating Instructions Preparation before operation . . 4 Remote Control Features . . . . . 5 Operation Mode Selection . . . . . . 6 Additional features. . . . . . . . . . . . . . 13 WARNING This symbol shows the possibility of death or serious injury. CAUTION This symbol indicates the possibility of injury or damage to property. I The following items are classified by these symblos. Operating Instructions Care and Maintenance Care and Maintenance . . . . . . . 17 Operation Tips . . . . . . . . . . . . . . . . . . . . 19 Never Do This Always Do This Troubleshooting tips Before You Call For Service . . . . . . . . . . . . . . . 20 WARNING WARNING Care and Maintenance Plug in the power plug properly. Do not operate or stop the unit by inserting or pulling out the power plug. [. . . ] In this mode, the wind blows like natural breeze by automatically changing fan speed according to the CHAOS logic. 6 Safety Precautions Auto Operation ENGLISH 1 Press the Start/Stop button. The unit will respond with a beep. Operating Instructions 2 Open the door on the remote control. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow. Cooling Auto Healthy Dehumidification Heating (Heat pump model only) Care and Maintenance ON 3 The temperature and fan speed are automatically set by the electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The cooler or warmer you feel, the more times (up to two times) you should press the button. The set temperature will be changed automatically. To raise the temperature Troubleshooting Tips To lower the temperature During Auto Operation: You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule. If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating mode to cooling mode, it must be done by manually resetting. During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. (Check the indication of 2nd function on remote control display. ) These buttons operate the timer setting as follows: CANCEL ON OFF SET Care and Maintenance CANCEL ON OFF SET 3 2nd function goes off in a short time automatically or when the button is pressed again. For more details, refer to functions next page. 12 Troubleshooting Tips Additional features Sleep Mode 1 2 Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically. The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times. The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner. Make sure the Sleep Mode Auto LED lights up. To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star ( ) disappears from the operation display. Note: The Sleep Mode will be operated at slow fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping. IN COOLING MODE OR HEALTHY DEHUMIDIFICATION MODE: The temperature will automatically rise by 1°C over the next 30 minutes and by 2°C in 1 hour for comfortable sleeping. Safety Precautions Operating Instructions ENGLISH 3 Setting the Time 1 Time can be set only when you have pressed the Reset button. If you have just replaced the batteries, the Reset button should be pressed to reset the time. Press the Start/Stop button. 3 Press the Time Setting buttons until the desired time is set. 4 2 Press 2nd F button and check if 2nd F icon is on. Press the Timer SET button. and P. M. CANCEL SET Care and Maintenance Delay Start/Pre-Set Stop 1 2 3 4 Make sure the time is set correctly on the remote control display. [. . . ] Operate the air conditioner on Air circulation mode (Refer to page 14) for 2 to 3 hours. · This will dry out the internal mechanisms. When the air conditioner is to be used again. Clean the air filter and install it in the indoor unit. [. . . ]