User manual LG V-K8820HFN

[. . . ] This symbol will alert you to hazards or unsafe practices which could cause serious bodily harm or death. This symbol will alert you to hazards or unsafe practices which could cause bodily injury or property damage. Do not plug in if control switch is not in OFF position. Keep children away and beware of obstructions when rewinding the cord to prevent personal injury The cord moves rapidly when rewinding. [. . . ] Do not dry the filter in a clothes dryer. If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner. check the vacuum cleaner for possible source of overheating such as a full dust tank , a blocked hose or clogged filter. If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner. After the 30 minute period, plug the vacuum cleaner back in and turn on the switch. How to use Assembling vacuum cleaner äÍ ÔÓθÁÓ, Ú¸Òfl ë· Push the nozzle into the telescopic pipe. Push telescopic pipe firmly into hose handle. Push the fitting pipe on the flexible hose into the attachment point on the vacuum cleaner. To remove the flexible hose from the vacuum cleaner, press the button situated on the fitting pipe, then pull the fitting pipe out of the vacuum cleaner. How to use Operating vacuum cleaner äÍ ÔÓθÁÓ, Ú¸Òfl ùÍÒÔÎÛÚ^Ëfl Ô°ÎÂÒÓÒ Pull out the power cord to the desired length and plug into the socket. Press the cord reel button to rewind the power cord after use. The indicator light of the hose handle is on and alarm will sound when dust tank is full. After about 1 min 30 sec, vacuum cleaner will turn itself off and alarm will sound. To store during vacuuming, for example to move a small piece of furniture or a rug, use park mode to support the flexible hose and nozzle. When you have switched off and unplugged the vacuum cleaner, press the cord reel button to automatically rewind the cord. You can store your vacuum cleaner in a vertical position by sliding the hook on the nozzle into the slot on the underside of the vacuum cleaner. When indicator light flashes and alarm sounds : 1. dust tank is full slide handle knob to OFF position and empty dust tank 2. Power is on without dust tank slide handle knob to OFF position and reattach dust tank 3. How to Use Using carpet and floor nozzle àÒÔÓθÁÓ, ÌË ËÁÂÎËfl The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. Hard floor position(tiles, parquets floor) Both pedal position are suitable. The 2 position nozzle This is equipped with a pedal which allows you to alter its position according to the type of floor to be cleaned. [. . . ] If filters are damaged, do not use them. in this cases , contact LG Electronics Service Agent. How to use Cleaning exhaust filter äÍ ÔÓθÁÓ, Ú¸Òfl óËÒÚÍ , °iÓÌÓ, , Ó ÙËÎ¸Ú To clean the exhaust filter, remove the Exhaust filter cover on the body by pulling out it. ) · The exhaust filter should be cleaned at least a year. [. . . ]