User manual LG V390

[. . . ] DVD PLAYER/ VIDEO CASSETTE RECORDER OWNER'S MANUAL MODEL : V390 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. [. . . ] Double speed playback Press the "N" button during normal playback. The tape will play back at double speed and without sound. Press the "N" button to return to playback at normal speed Picture search: During playing back press either BACKWARD or FORWARD to this will enable you to rapidly wind the tape see where you are on the tape. Logic search: During fast forwarding or rewinding press and hold m or M the picture will be played back at 7 times normal playback speed. 4. Press 3 or 4 repeatedly to select: OFF, SOFT or SHARP. Please note you may only set OPR when playing a tape. Press i return to screen. PSET R Pr-12 ACMS OFF 12 SOFT SYS SET SHARP R f OSD ON OFF 20 Operation with tape Instant Timer Recording (ITR) Your DVD+VCR allows you to make recordings using a variety of simple methods: Instant Timer Recording (ITR) start recording immediately for a set period of time or until the video cassette runs out. Your DVD+VCR incorporates Long Play (LP) which enables you to record up to twice the amount of time on a video cassette. For example an E-180 will record up to 180 minutes using Standard Play (SP); using LP you will be able to record up to 360 minutes. Please note there will be a slight loss in picture and sound quality when using LP. Make sure that you have correctly connected your DVD+VCR as described earlier in this book. Insert a video cassette with protection tab into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press 3 or 4 to select the programme number you wish to record. You may also directly select programme number using the numbered buttons on the remote control. If you wish to record directly from the SCART or RCA jacks, repeatedly press AV until the socket you wish to record from is displayed. AV 1 for recording from EURO AV1 SCART jacks on the rear of your unit. AV 2 for recording from EURO AV2 DECODER jacks on the rear of your unit. AV 3 for recording from VIDEO IN and AUDIO IN (Left & Right) jacks on the front of your unit. Press LP if you wish to record in Long Play or Standard Play. SP will produce improved picture and sound quality, however LP will provide twice as much recording time as SP. Press REC/ITR on the remote to start recording. [. . . ] The power is on, but the DVD player does not work. Correction Insert a disc. The TV is not set to receive this unit's signal output. The video cable is not connected securely. The Progressive Scan is set to "On" on the setup menu but is connected to a standard (analog) television. Select the appropriate video input mode on the TV so the picture from the this unit appears on the TV screen. [. . . ]