User manual LG W1943TB

[. . . ] User's Guide W1943SB W1943TB W2043SE W2043TE W2243S W2243T Make sure to read the Important Precautions before using the product. Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Important Precautions This unit has been engineered and manufactured to ensure your personal safety, however improper use may result in potential electrical shock or fire hazards. In order to allow the proper operation of all safeguards incorporated in this display, observe the following basic rules for its installation, use, and servicing. On Safety Use only the power cord supplied with the unit. In case you use another power cord, make sure that it is certified by the applicable national standards if not being provided by the supplier. [. . . ] This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 8 Connecting the Display Connecting with the PC W1943SB/W2043SE/W2243S 1. Before setting up the monitor, ensure that the power to the monitor, the computer 2. Connect signal input cable 1 system, and other attached devices is turned off. and power cord of the signal cable. A Connect D-sub(Analog signal) Cable 2 in order, then tighten the screw NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. When using a D-Sub signal input cable connector for Macintosh Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. Varies according to model. Wall-outlet type A PC 3. Press the power button on the front panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. Power Button NOTE ` Self Image Setting Function'?This function provides the user with optimal display settings. When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 9 Control Panel Functions Front Panel Controls W1943TB/W2043TE/W2243T 1 2 3 4 5 W1943SB/W2043SE/W2243S 1 2 3 4 5 Button Use this button to enter 4:3 IN WIDE, PHOTO EFFECT menus. For more information, refer to page 14. MENU Button Use this button to enter or exit the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that they cannot be inadvertently changed. Press and hold the MENU button for several seconds. The message "OSD LOCKED" should appear. You can unlock the OSD controls at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" should appear. 10 Control Panel Functions Buttons Use these buttons to select or adjust functions in the On Screen Display. Use this function to select optimal image conditions in accordance with the surrounding environment (Brightness, Image type). For more information, refer to page 15. (SOURCE Hot key) When two input signals are connected, you can select the input signal (D-SUB/DVI) you want. When only one signal is connected, it is automatically detected. (Only W1943TB/W2043TE/W2243T ) AUTO/SET Button Use this button to enter a selection in the On Screen Display. button on MENU : Exit : Move SET : Select Main menu 4:3 IN WIDE Description To select the image size of the screen. WIDE 4:3 · WIDE · 4:3 : Switch to full screen mode according to input image signal. : Change the input image signal ratio to 4:3. PHOTO EFFECT To select the color effects of the screen. · NORMAL The PhotoEffect function is disabled. · GAUSSIAN BLUR Use the AUTO/SET button to go to sub-menu. This menu changes the screen to be more colorful and smoother. [. . . ] packing) Range Power Input Environment al Conditions Tilt : -5°~15° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. 23 Specifications Display 18. 51 inches (47. 01 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 47. 01 cm 0. 30 x 0. 30 mm (Pixel pitch) Horizontal Freq. Input Form 30 - 61 kHz (Automatic) 56 - 75 Hz (Automatic) Separate Sync. SOG (Sync On Green) 15 pin D-Sub Connector RGB Analog (0. 7 Vp-p/ 75 ohm) VESA 1360 x 768 @60 Hz VESA 1360 x 768 @60 Hz W1943SB Sync Input Video Input Signal Input Input Form Max Recommend DDC 2B On Mode Sleep Mode Off Mode Resolution Plug&Play Power Consumption Dimensions & Weight : 21W(Typ. ) 1W 1W Without Stand Width 44. 90 cm / 17. 68 inches Height 29. 05 cm / 11. 44 inches Depth 5. 85 cm / 2. 30 inches 3. 3 kg (7. 28 lbs) With Stand Width 44. 90 cm / 17. 68 inches Height 36. 10 cm / 14. 21 inches Depth 18. 30 cm / 7. 20 inches Weight(excl. packing) Range Power Input Environment al Conditions Tilt : -5°~15° AC 100-240V~ 50/60Hz 0. 8A Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Stand Base Power cord Attached ( ), Detached ( O ) Wall-outlet type NOTE Information in this document is subject to change without notice. 24 Specifications Display 20. 0 inches (50. 8 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 50. 8 cm 0. 2766 x 0. 2766 mm (Pixel pitch) Horizontal Freq. [. . . ]