User manual LG WD-10156TP

[. . . ] If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped, hit or scratched. [. . . ] If any items are missing, contact your dealer. User's Manual Display Driver Diskette (not available in all locations) Monitor Warranty Warranty card (not available in all locations) Stand Power cord English - 1 Español This manual Français English Contents EDel2. book Page 2 Monday, April 17, 2000 10:47 PM Operation Connecting Your Monitor 3 2 4 1 2 Turn off your computer and unplug the power cord. Signal cable Connect the end of the signal cable to your computer's video port. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the pins on your adapter (adapter not included). A PC-compatible computer does not need an adapter. Power port Connect the power cord for your monitor to the power port on the back of the monitor. 4 5 6 Power cords Plug the power cord for the monitor and the power cord for your computer into a nearby outlet. If your monitor displays an image, installation is complete. Install the monitor driver · Insert the provided diskette into the 3 A drive. · Double click the "install. exe" file. The Front Panel 1 4 2 3 1 2 Monitor control buttons All adjustments to the image display are made using these control buttons, including control of the screen display area shape and the display image. Adjustment buttons The decrease ( ­ ) button lowers the value of the selected function. The increase ( + ) button raises the value of the selected function. 3 4 Power indicator This light glows green during normal operation. It also blinks when a function button is pressed, or while a function setting is being automatically saved. Power button Turns the monitor on and off. English - 2 EDel2. book Page 3 Monday, April 17, 2000 10:47 PM Monitor Control Buttons 1 2 Press the desired control button once. The colors are distorted with dark or shadowed areas. s Activate the degauss feature (page 4). There is no screen image and the power indicator light blinks every 0. 25 seconds. s The input signal frequency is over or under the synchronization range of the monitor, see "Specifications" on page 6. s Download the driver from the internet at http://www. samsungelectronics. com/support /downloads/monitor/index. html PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you move the computer's mouse or press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use a software utility installed on your computer to set up this feature. Power saving function modes EPA/NUTEK State Normal operation Green 75W (maximum) 65W (nominal) Standby mode Suspend mode Power-off mode Position A1 Position A2 Power Indicator Power Consumption Green Blinking Green Blinking Green Blinking (0. 5 sec. interval) 50W (nominal) Less than 15W Less than 3W Note: This monitor is EPA ENERGY STAR® compliant and NUTEK compliant when used with a computer equipped with VESA DPMS functionality. [. . . ] If this equipment does cause harmful interference to radio or television receptions, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: s Reorient or relocate the receiving antenna. s Increase the separation between the equipment and receiver. s Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. s Consult the dealer or an experienced radio/TV technician for help. this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]