User manual LG WT-R1675TH

[. . . ] Please read this manual carefully before operating your set. Record model name and serial number of the set. Quote this information to your dealer when you require service. The Turbo Drum DD washing machine does not operate with the lid open. [. . . ] ⷠPower option selections light up in sequence as follows Normal Heavy Light Normal as the button is pushed. ⷠAdjustment can be made while washing. Use this when you want to dry the empty tub after a wash. Use when wash, rinse, spin time need to be adjusted. If adjustments are needed during the wash, press the [start/pause ] button before making any changes. ⷠWhen the button is pressed during washing, the remaining time is displayed. Use to lock or unlock the control buttons to prevent settings from being changed by a child. To lock, push the RINSE and SPIN buttons simultaneously and to unlock push them one more time during the washing process. * For optimizing the washing algorithm, the displaying time may be changed during washing-increased by 8minutes at maximum and decreased by 4 minutes at maximum. * If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically adds rinsing, and the remaining time may be increased. So, it does not matter that the user uses it according to her/his washing habit. * The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased. During being detected by the sensor, the LED flashes green, orange and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as follows: If the current washing condition (Detergent quantity, Water Temperature, water quality, etc. ) is determined as better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength, and the LED automatically turns to red. If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by increasing washing time/strength, and the LED automatically turns to orange. If the current washing condition is determined as equal to the standard one, the algorithm has no change and the LED turns to green. ⷠPush again and power goes on or off · The power goes off automatically about 10 seconds after the wash is finished. The following settings are indicated as the button is pushed 3 4 5 . To cancel delay time, turn the power switch off. ⷠThis button allows you to select 8 different programs for different kinds of laundry and dirtiness. [. . . ] Wash with JEAN or SOAK & JEAN wash cycle for heavy soiled laundry. Pretreat stain and heavy soil according to directions shown on page 9. Do not overfill fabric softener dispenser and do not pour liquid fabric softener directly onto fabric. Keep the recommendations against Scrud(waxy buildup). [. . . ]