User manual LIEBHERR CBP 4033 COMFORT BIOFRESH

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General safety information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 7 (30) out of the door bearing bush and transfer it. (1) Stack cabinet (3) Kitchen cabinet (2) Appliance (4) Wall When inserting the appliance into a row of standard kitchen units (max. depth 580 mm), the appliance can be installed directly next to the kitchen unit Fig. The appliance door projects relative to the front of the kitchen unit by 34 mm at the side and by 50 mm in the middle of the appliance. It can be opened and closed perfectly as a result. Important for the ventilation: - At the back of the stack cabinet there has to be a ventilation duct of at least 50 mm depth throughout the width of the stack cabinet. - The ventilation space under the ceiling has to be at least 300 cm2. - The larger the ventilation space, the more energy-saving the appliance is in operation. If the appliance is installed with the hinges next to a wall Fig. 8 (4), the distance between appliance and wall has to be at least 50 mm. This corresponds to the projection of the handle when the door is open. Fig. Subsequent cleaning becomes easier as a result. u Wipe side walls with a paint finish using a soft, clean cloth only. u Remove the protective film from the decorative trims. * u Remove all transit supports. u Dispose of packaging material (see 4. 5) . 4. 6 Connecting the appliance NOTICE Risk of damage to the electronic control system!u Do not use stand-alone inverters (conversion of d. c. to a. c. / three-phase) or energy saving plugs. WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. The type of current (alternating current) and voltage at the installation site have to conform with the data on the type plate (see Appliance at a glance). Connect the appliance only with a properly installed socket outlet with earthing contact. The socket outlet must be fused with 10 A or higher. It must be easily accessible so that the appliance can be quickly disconnected from the supply in an emergency. [. . . ] As a result, adjoining units or objects are set into vibration by the running refrigeration unit. u Move the appliance away a little and align it using the adjustable feet. The door of the appliance is not properly closed. The appliance was opened too frequently or for too long. [. . . ]