User manual LIEBHERR GNP 2303 COMFORT NOFROST

[. . . ] Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . External dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . Saving energy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Insulation plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 5 (2) firmly into place on the new hinge side (with 4 Nm), possibly using a power screwdriver. Fig. 5 WARNING Risk of injury due to the door dropping out!If the bearing parts are not screwed into place firmly enough, the door may drop out. What is more, the door may not close and therefore the appliance may fail to cool properly. u Screw on the bearing brackets/bearing pins tightly (4 Nm). u Check all of the screws and retighten if necessary. u At the top, use a screwdriver to unclip cover Fig. 6 (8) at the front, and remove by pulling out and down. Fig. 6 6 Control 4. 4 Insertion into a row of kitchen units The packaging is made of recyclable materials: - corrugated board/cardboard - expanded polystyrene parts - polythene bags and sheets - polypropylene straps - nailed wooden frame with polyethylene panel* u Take the packaging material to an official collecting point. 4. 6 Connecting the appliance NOTICE Risk of damage to the electronic control system!u Do not use stand-alone inverters (conversion of d. c. to a. c. / three-phase) or energy saving plugs. WARNING Fire and overheating hazard!u Do not use extension cables or multiple socket outlets. Please contact the after sales service. 5 Control 5. 1 Brightness of the temperature display You can adjust the brightness of the temperature display to the light conditions of the room in which the appliance is installed. 5. 1. 1 Adjusting the brightness The backlight can either be switched off or set to one of 5 levels. u To activate the setting mode: Press the SuperFrost button Fig. 3 (9) shines and the child lock symbol Fig. 3 (6) to select the brightness function. 3 (8) goes out and the brightness symbol Fig. u To confirm: Briefly press the SuperFrost button Fig. 3 (3) shines. 4. 5 Disposing of packaging WARNING Danger of suffocation due to packing material and plastic film!u Do not allow children to play with packing material. 7 Control u Using the setting button Fig. 3 (6), select either "off" or the brightness wanted. The more display fields of the temperature display that light up, the brighter it is. If no field is lit up, it means "off". [. . . ] u The compressor runs for longer in order to rapidly cool the food. A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*. → The inverter is equipped with a diagnostic LED. → Speed-controlled* compressors may produce varying running noise due to different speed steps. [. . . ]