User manual LIEBHERR WTES 5872 VINIDOR

[. . . ] • Cut through the connection cable. When disposing of the appliance, ensure that the refrigerant circuit is not damaged to prevent uncontrolled escape of the refrigerant it contains (data on type plate) and oil. Climate rating SN N ST T SN-ST SN-T Room temperature +10°C to +32°C +16°C to +32°C +16°C to +38°C +16°C to +43°C +10°C to +38°C +10°C to +43°C WARNING Danger of suffocation due to packing material and plastic film!Do not allow children to play with packaging material. Take the packaging material to an official collection point. Do not operate the appliance outside the specified room temperature range. - in staff kitchenettes, bed and breakfast establishments, - by guests in cottages, hotels, motels and other forms of accommodation, - in catering and similar services in the wholesale trade. Use the appliance solely as is customary within a domestic environment. [. . . ] Do not connect the appliance using an extension cable or extension socket. Do not use stand-alone inverters (conversion of direct current to alternating/three-phase current) or energy-saving plugs. Risk of damage to the electronic control system! Electrical connection 15 The electronic control panel has the new "touch capacitance technology". Any function can be activated by touching the corresponding icon. The exact contact point is between the symbol and its label Operating and control elements Switching the appliance on Press the On/Off button until the temperature display lights up. Switching the appliance off Keep the On/Off button pressed for approx. 3 seconds so that the temperature display goes out. Switching the appliance on and off The temperature of all compartments can be set separately. Setting the temperature 1 n/Off button (switching the appliance on and off) O 2 an switch F 3 nterior light On/Off button I 4 isplay D 5 utton to activate a compartment to adjust its temperature B 6 emperature setting buttons T 7 udible warning On/Off button A Temperature display These symbols indicate which compartment is active so that its temperature can be adjusted. Upper compartment temperature display Middle compartment temperature display Lower compartment temperature display The symbol indicates which compartment is active. Reducing the temperature Press the Down button. Increasing the temperature Press the Up button. Use the Zone button to select the compartment whose temperature you wish to adjust. - When pressing one of the buttons for the first time, the display will start to flash. - Pressing this button again enables you to change the temperature setting. The child lock is designed to protect the appliance from being switched off accidentally. The child lock is designed to protect the appliance from being switched off and the temperature setting from being changed accidentally. Additional functions h0 = display lighting off h1 = minimum brightness h5 = maximum brightness Display = Activating the child lock Press for 5 seconds. Display = Display = The adjusted brightness will be activated after one minute. Display = Note If a button is pressed, the display lights up for one minute at maximum brightness. Display = Display = 17 Additional functions Demo mode can be activated for presenting the appliance at exhibitions or in salesrooms as though in normal operating mode. If this mode is activated by accident, it can be deactivated as detailed below. Display = When in this mode, the cooling circuit is switched off! Demo mode The interior of the appliance is lit by an LED light strip at the top of each compartment. The interior light will always switch on when the appliance door is opened. Press the Light button if you want the interior light to be on even when the door is closed. Note This function applies to the lighting of all three compartments. Furthermore, the brightness of the lighting can be adjusted. Interior light Display = • Press the Light button. Display = The refrigeration unit switches on. The appliance is now in normal operating mode. • Press and hold the Light button and at the same time press the temperature setting buttons to increase or decrease the brightness. [. . . ] Please note that noises caused by the refrigerant circuit cannot be avoided. • The temperature is not low enough: – Is the temperature setting correct (see "Setting the temperature")?– Does the separately installed thermometer show the correct reading?– Is the ventilation system working properly? [. . . ]