User manual LIFESCAN ULTRASMART

[. . . ] OneTouch® Customer Care Line: Canada 1 800 663-5521 U. S. A. 1 800 227-8862 Monday-Friday 9am-8pm Eastern Time 6am-5pm Pacific Time www. OneTouch. ca Distributed by: LifeScan Canada Ltd. 08/06 The system described herein is covered by one or more of the following U. S. patents: D428, 150, 5, 708, 247, 5, 951, 836, 6, 045, 567, 6, 156, 051, 6, 197, 040, 6, 241, 862, 6, 284, 125, 6, 413, 410, and 6, 733, 655 AW06139303A ® Meter and Electronic Logbook In One Owner's Booklet ® UltraSmart UltraSmart Blood Glucose Monitoring System Owner's Booklet ii Dear OneTouch® UltraSmart® System Owner: You have chosen one of the best blood glucose monitoring systems available. [. . . ] Insert the test strip correctly with the contact bars end first and facing up. Call the OneTouch® Customer Care Line at 1 800 663-5521. Defective meter or test strip. 56 If the test does not start after applying the sample: POSSIBLE CAUSES Insufficient blood sample. WHAT TO DO Repeat the test with a new test strip and a larger sample, making sure blood is placed to the narrow channel in the top edge of the test strip. Repeat the test with a new test strip; apply sample only after "Apply Blood", "Alternate Site", or "Control Solution" appears on the display. Call the OneTouch® Customer Care Line at 1 800 663-5521. Defective test strip. Sample applied after automatic shutoff (three minutes after inserting a test strip). Defective meter. 57 METER SET-UP Note: · It is important that the time of day is correct and that your medication set-up and mealtimes are set according to your personal daily schedule. Otherwise, some FastFacts® information will not be correct. · You do not need to change any of the meter settings in order to begin testing. Simply insert a test strip to turn on the meter and proceed with the test (see pages 19­39). The OneTouch® UltraSmart® Meter was pre-set at the factory with the date and Eastern Standard Time, and display language. The glucose units are pre-set at the factory and cannot be changed. You must enter Set-up mode to: · Change the date, time, or display language. (Glucose units cannot be changed. ) · Customize the meter features that allow you to track diabetes pills, insulin doses, and insulin pump information. · Customize advanced features such as averages, meal schedule, target glucose range, and hypoglycemia level. Entering Basic Set-up Mode To enter Set-up mode, press and hold down BOTH the Back button and the OK button at the same time for at least two seconds. OK 58 This message will appear briefly. The language menu will follow immediately. The SmartButtons® cannot be used while you are in Set-up mode. (You may still test at any time simply by inserting a test strip. ) Selecting Display Language The meter is set at the factory to use English. UltraSmart aSmart To use English, press the OK button OK . Set up in?English Espaol Franais Deutsch Italiano Portugus Nederlands You may choose one of up to six other languages in Set-up mode. Spanish (Español) French (Français) German (Deutsch) Italian (Italiano) Portuguese (Português) Dutch (Nederlands) Rglage en ?English Espaol Franais Deutsch Italiano Portugus Nederlands To change the language, use the Arrow button to scroll to the language. With your language choice highlighted, press the OK button . OK 59 Setting Date and Time After the language has been set, the meter will display the factory-set time and date. If the date and/or time are incorrect, follow these steps in Set-up mode (see page 58, Entering Basic Set-up Mode). [. . . ] 21­22, 27, 30, 33 Forearm or Palm Sampling, Important Information . 109­110 Glucose Graph, Interactive . 4­5, 77, 82­83 130 High Glucose. v, 21­22, 38­39, 50­51 Hypoglycemia Information (Hypo Info) . [. . . ]