User manual LIFT-MASTER 909210MOCDE

[. . . ] AUXILIARY LIMIT SWITCH CARTON INVENTORY DESCRIPTION Limit switch Pan head screw #4-40 x 3/4" Internal tooth lock washer Limit switch backup plate Limit switch nut plate Limit switch mounting bracket Pan Head screw #8-32 x 1/4" White wire used with "OPEN" limit switch 16 Gauge, 24" Blue wire used with "CLOSE" limit switch 16 Gauge, 24" Mini Switches and Wire Leads For Damp Environment Application 909210MOCDE and K909210M2DE QTY 2 4 4 2 2 1 2 3 FIGURE 1 3 Auxiliary Open Limit Switch NC NO WH WH NC C BL BL BL (NO) (NC) (C) (NO) (NC) C WH (C) WARNING CAUTION WARNING To prevent possible SERIOUS INJURY or DEATH from electrocution, disconnect electric power to operator BEFORE installing. [. . . ] The switch can be used to turn on or off such equipment when the door is fully opened, fully closed or during travel. FIGURE 2 Pan Head Screws #4-40x3/4" (4 Pieces) Limit Switch Nut Plate #4 Internal Tooth Lock Washer Backup Plate (1 Per Switch) COMPONENT MOUNTING 1. Locate the new auxiliary limit switch bracket assembly with the limit switches attached. Loose end of limit arm on switch should face the side of electrical box (Figure 2). Fasten the limit switch bracket to the component mounting plate at the bottom of the electrical box using the two #8-32 x 1/4" pan head screws provided (Figure 2). [. . . ] Reconnect power to operator. Auxiliary Switch Mounting Bracket Pan Head Screws #8-32 x 1/4" (2 Pieces) 01-33286B © 2006, The Chamberlain Group, Inc. [. . . ]