User manual LIFT-MASTER ACRX2-1025

[. . . ] Access Control Receiver ACRx 2 Model 1025 OWNERS MANUAL To comply with FCC/IC rules, adjustment or modification of receiver and/or transmitter is prohibited, except for changing the code setting and replacing the transmitter battery. THERE ARE NO USER SERVICEABLE PARTS. ACRx 2 MODEL 1025LM TM exit WARNING Disconnect power to the garage door or gate opener before installing the receiver. Children operating or playing with a garage door or gate opener can injure themselves and others. The garage door or gate could close and cause serious injury or death. [. . . ] This provides the best amplification of the only desired signal. COAXABLE CABLE ANTENNA ANTENNA AMPLIFIER AMPLIFIER ACRx model ACRx model G1000 G1000 16 CHARACTER LCD Lift-Master 16 CHARACTER LCD Lift-Master exit exit DEVICE SETUP ADD USER ENTER Z0 A 9 V O L T A G E S E L E C T O R ADD USER ENTER Z0 DELETE USER BLOCK USER DEVICE SETUP DELETE USER BLOCK USER RELAY OUTPUT N. O. contacts A 9 V O L T A G E S E L E C T O R RELAY OUTPUT N. O. contacts ! HAZARDOUSVOLTAGES PRESENT!KEEP TERMINALS COVERED SCROLL SERIAL PORT GRANT ACCESS 24v wallpack 12 / 24v AC/DC external GRANT sw. ! HAZARDOUSVOLTAGES PRESENT!KEEP TERMINALS COVERED SCROLL SERIAL PORT GRANT ACCESS 24v wallpack 12 / 24v AC/DC external GRANT sw. relay audio alert relay audio alert MOUNTING BRACKET 3 OPERATION The controls and display on the ACRx 2 panel are very simple for ease of operation. Most programming tasks require pushing one button for the desired operation, then completing the displayed instructions. A summary of these procedures is printed inside the ACRx 2 panel door. Before use, each transmitter must be programmed into the system by the Add Users function. This "learns" the unique radio code of that transmitter, and assigns it a User ID code chosen by the programmer; this User ID may be the user's name, unit number, or any combination up to five letters and numbers. Once programmed, the transmitter can be used to control access. The ACRx 2 can output the date, time, and User ID for each access. User IDs can be Deleted when no longer allowed, or Blocked from access temporarily. A Setup function is used to set the time, date, and other details of ACRx 2 operation. Setup Basic settings on the ACRx 2 are changed through the Setup routine. These include the time, date, and other optional settings. To change any of the following items, press the SETUP/EXIT button. The message "scroll for MENU" will appear; turn the dial to choose the item that you want to change, then press the ENTER button. If you wish to leave the Setup mode without doing anything, press SETUP/EXIT again to return to the regular display, which shows the date and time alternately. Change PASSWORD: A password may be used to protect the ACRx 2 against unauthorized access. The unit is shipped with the Password function disabled. To enable this feature, select a four digit password composed of letters and/or numbers. Once a password has been entered no changes can be made to the ACRx 2 memory without supplying the password. [. . . ] The User ID of the transmitter and the date and time of the attempt are recorded. (In all these cases the date and time recorded depend upon the date and time being correctly set in the ACRx 2. To change the date or time, refer to the Setup section of these instructions. ) When attached to a serial interface port of an MS-DOS computer equipped with Microsoft Windows® and LiftMaster's own Total Control software, the ACRx 2 can be remotely programmed and activity recorded. For more information about this feature, call your local Lift-Master dealer. [. . . ]