User manual LINE 6 XD-V70 WIRELESS ADVANCED GUIDE REV A

[. . . ] ® XD-V70 Wireless Advanced Guide For single and multi-channel operation of XD-V70 Wireless Electrophonic Limited Edition - Rev A Table of Contents About The XD-V70 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1·1 XD-V70 Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2·1 User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2·1 Front Panel LED Ladders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Install the "short" rack ear that was supplied with each receiver into the outside slots and you are ready to bolt the pair into a rack. When additional "pairs" are constructed, the un-used dovetail keys can be used in the top and bottoms between the pairs locking them together into a single block. 2·5 Power Supplies The XD-V70 is supplied with the Line 6 DC-1G power supply. The supply can be used with any AC input voltage from 90-240VAC. XD-V70 Wireless Microphone XD-V70 WiReleSS micRophone MUTE SELECT 3·1 The Line 6 XD-V70 handheld transmitter is constructed with a metal body and mic capsule and features a polycarbonate battery cover. It features six mic models based on some of the world's leading wired dynamic microphones, as well as the L6-DC7 Line 6 model. In addition, the mic capsule is interchangeable with many other popular models. The models are labeled in the display as follows: Display 58 b58 835 41 767 o5 L6 Model based on* Shure® SM58® Shure® Beta 58A Sennheiser® e 835 Audio-Technica® AE4100 Audix® OM5 Electro-Voice® N/D767 Line 6 optimized model *All product names used in this webpage are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6's sound model development. Pushing the "POWER/MUTE" button will scroll through the model choices, and they may be auditioned in real time. Switching models will affect the frequency response, the proximity effect, and the output level at the receiver output just as though you were to "hot-swap" the wired mics that the models are based on. Mic models do not change the basic cardioid polar pattern of the microphone. Should a different polar pattern be desired, third party capsules may be used (see the section on mic capsules below). XD-V70 Wireless Microphone Transmitter Name ("Name") The default for the name feature is off. Pressing the "POWER/MUTE" button and selecting "On", advances the user to the naming screen. Here you may scroll through the alphanumerical list by pressing the "POWER/MUTE" button and assign up to 6 characters (A-Z, blank space, -, and 0-9 are available) to name the transmitter. Pressing "SELECT" advances the user to the next character to the right. This name will be transmitted to the receiver, where it will be displayed in the receiver's LCD window allowing easy match-up of transmitter to receiver. When the name feature is off, the receiver will show the model name of the transmitter (e. g. , "THH12" for the handheld microphone). Exit Edit Mode Pressing and holding the "SELECT" button stores the performed edits into the microphone's memory. The edits are remembered when powering down and then turning back on, and when the batteries are replaced. They are also remembered should the batteries die during a performance. If no actions are performed for 10 seconds, "time out" will occur and the transmitter will automatically exit edit mode (and save any edits that had been made). 3·3 Mute Function While not in Edit Mode, press the "POWER/MUTE" button for approximately one second to initiate the mute function. The LCD will remain illuminated while in Mute mode. Lock Out Switch A small slide switch is provided under the battery cover and behind the battery compartment for user lockout. Sliding the switch locks out all button functions on the top panel including channel selection, muting and power off. If the switch in engaged before the power is turned on the performer is allowed to turn on the transmitter. At that point all button function is locked until the switch is physically reset. Mic Capsules Certain third party wireless mic capsules may be installed in place of the Line 6 Mic capsule, offering users even more flexibility in choosing performance characteristics and XD-V70 Wireless Microphone for pattern control. [. . . ] NiMH are recommended in the 2400-2800 mAh range. It is essential that the charger and charge rate correspond to the actual batteries used. Make certain that any batteries selected fit properly in the transmitters as these batteries vary in maximum outside diameter. Do not charge these batteries inside XD-V70 transmitters. [. . . ]