User manual LINKSYS E1000

[. . . ] 43 Wireless-N Router iii Linksys E1000 Chapter 1: Product Overview Internet  (Blue)  The Internet LED lights up when there is a connection made through the Internet port. it flashes to indicate network activity over the Internet port. Power  (Blue)  The Power LED lights up when the Router is powered on. When the Router goes through its self-diagnostic mode during every boot-up, the LED flashes. [. . . ] No Acknowledgement  If you want to disable the Router’s Acknowledgement option, so the Router will not re-send data if an error occurs, then select Enabled. Your new entry will appear in the Summary list. Add a New Application Internet Access Priority In this section, you can set the bandwidth priority for a variety of applications and devices. there are four levels of priority: High , Medium , Normal , or Low. When you set priority, do not set all applications to High, because this will defeat the purpose of allocating the available bandwidth. If you want to select below normal bandwidth, select Low. Depending on the application, a few attempts may be needed to set the appropriate bandwidth priority. Enabled/Disabled  To use the QoS policies you set, select Enabled. Upstream Bandwidth  This option sets the maximum outgoing bandwidth that applications can use. To allow the Router to set the maximum, keep the default, Auto. To specify the maximum, select Manual and enter the bandwidth. qoS > Add a New Application Enter a Name  Enter a name for this application. Port Range  Enter the port range that the application will be using. For example, if you want to allocate bandwidth for FTP, you can enter 21-21. If you need services for an application that uses from 1000 to 1250, you enter 10001250 as your settings. You can have up to three ranges to define for this bandwidth allocation. Check your application’s documentation for details on the service ports used. Your new entry will appear in the Summary list. Category You can define the Internet access priority level for as many categories as you want. The Summary section will display all of the priority selections that you enter. Select from the following categories: •• Applications  Allows you to assign a priority level for a pre-defined application or one that you add. €• Online Games  Allows you to assign a priority level for Online Games a pre-defined game or one that you add. [. . . ] Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. All advertising materials mentioning features or use of this software must display the following acknowledgment: “This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. The names “OpenSSL Toolkit” and “OpenSSL Project” must not be used to endorse or promote products derived from this software without prior written permission. Products derived from this software may not be called “OpenSSL” nor may “OpenSSL” appear in their names without prior written permission of the OpenSSL Project. [. . . ]