User manual LINKSYS EFG120

[. . . ] ® A Division of Cisco Systems, Inc. EtherFast® Network Attached Storage 120GB with PrintServer WIRED User Guide Model No. EFG120 EtherFast Network Attached Storage (120GB with PrintServer) Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] For more information about this screen, click the Help button. User Membership On the User Membership screen, the Member of column lists the group memberships for the selected user, while the Other Groups column lists all of the other groups. In the right-hand column, select the group or groups whose membership you want to add, and then click the << button. Multiple groups can be selected by holding down the CTRL key while you make the selections. In the left-hand column, select the group or groups whose membership you want to revoke, and then click the >> button. Multiple groups can be selected by holding down the CTRL key while you make the selections. Click the Help button for more information. Figure 5-12: User Membership Screen The Administration Tab - Status The Status screen allows you to check the Network Attached Storage's details and status. System Information System GigaDrive Name. This is the Network Attached Storage's current name, which will be used to identify it in Network Neighborhood or My Network Places. This displays the Network Attached Storage's current IP Address. This indicates the Network Attached Storage's current status, which will usually say, "Ready". If the Network Attached Storage is not available, then a message will say why it is not available (for example, it may say "Scandisk in Progress" if the Network Attached Storage is busy undergoing the scandisk process). Click the Shutdown Now button to immediately shut down the Network Attached Storage. This will break all existing connections. Any new settings you may have entered will not be saved. Chapter 5: Configuring the Network Attached Storage The Administration Tab - Status Figure 5-13: Administration Tab - Status 29 EtherFast Network Attached Storage (120GB with PrintServer) Click the Restart Now button to restart (reboot) the Network Attached Storage. This will break all existing connections. The Network Attached Storage will immediately restart and won't be available again until after the restart is complete. Any new settings you may have entered will not be saved. Click the View Log button to view the log file in a separate window. The log file is a record of the Network Attached Storage's activities, so it may help with management and troubleshooting. Click the Refresh button to refresh the screen. Click the Clear Log button to clear all of the log entries. Printer Current Status. The possible states are On-line, Off-line, and Out of Paper. [. . . ] Linksys pays for UPS Ground shipping from Linksys back to You only. Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges. ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. [. . . ]