User manual LINKSYS SRW224G4

[. . . ] ® A Division of Cisco Systems, Inc. 24 or 48-Port 10/100 Fast Ethernet Switch 16, 24, or 48-Port 10/100/1000 Gigabit Ethernet Switch WIRED with WebView User Guide Model No. SRW2016/SRW2024/SRW2048/SRW224G4/SRW248G4 WebView Switches Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] Select how often you want the interface statistics refreshed. This is the number of octets received on the selected interface. Displayed here is the number of unicast packets received on the selected interface. Displayed here is the number of multicast packets received on the selected interface. Displayed here is the number of broadcast packets received on the selected interface. This is the number of error packets received from the selected interface. s Transmit Statistics Total Bytes. This is the number of octets transmitted from the selected interface. Displayed here is the number of unicast packets transmitted from the selected interface. Displayed here is the number of multicast packets transmitted from the selected interface. Displayed here is the number of broadcast packets transmitted from the selected interface. Click the Clear All Counters button to reset all statistics to zero. Figure 5-54: Statistics - Interface Statistics Chapter 5: Using the Web-based Utility for Configuration Statistics Tab - Interface Statistics 58 WebView Switches Statistics Tab - Etherlike Statistics The Etherlike Statistics screen displays interface statistics. Select the appropriate interface, Port or LAG. Then, select the appropriate number from the dropdown menu. Select how often you want the interface statistics refreshed. Displayed here is the number of FCS errors received on the selected interface. Displayed here is the number of single collision frames received on the selected interface. Displayed here is the number of late collision frames received on the selected interface. Displayed here is the number of excessive collisions received on the selected interface. Displayed here is the number of oversized packet errors on the selected interface. Displayed here is the number of internal MAC received errors on the selected interface. Displayed here is the number of received paused frames on the selected interface. [. . . ] Caution: Use only twisted-pair cables with RJ-45 connectors that conform to FCC standards. Caution: The PoE (Power over Ethernet), which is to be interconnected with other equipment that must be contained within the same building including the interconnected equipmentís associated LAN connections. Note: When selecting a fiber SFP device, considering safety, please make sure that it can function at a temperature that is not less than the recommended maximum operational temperature of the product. You must also use an approved Laser Class 1 SFP transceiver. Appendix F: Regulatory Information 110 WebView Switches Hinweis: Bei der Wahl eines Glasfasertransceivers muß für die Beurteilung der Gesamtsicherheit beachtet werden, das die maximale Umgebungstemperatur des Transceivers für den Betrieb nicht niedriger ist als die für dieses Produkts. [. . . ]