User manual LINKSYS WAP300N

[. . . ] En webstedsundersøgelse for trådløst netværk identificerer trådløse netværk inden for rækkevidde af WAP300N, så du nemt kan vælge at oprette forbindelse til et af disse netværk. Se Sådan køres en webstedsundersøgelse for trådløst netværk nedenfor for at få instruktioner. Sådan køres en webstedsundersøgelse for trådløst netværk Vi anbefaler at bruge en webstedsundersøgelse for trådløst netværk til konfiguration af WAP300N i trådløst mediestiktilstand. En webstedsundersøgelse for trådløst netværk identificerer trådløse netværk inden for rækkevidde af WAP300N, så du nemt kan vælge at oprette forbindelse til et af disse netværk. [. . . ] For instructions on using wireless network site survey to connect your WAP300N to a wireless router, see “How to run a wireless network site survey” on page 12). setting Up: Basics How to use Wireless Bridge mode How to select Wireless Bridge mode To select Wireless Bridge mode: Setup > Operation Mode 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 8). Click the Setup tab, then click the Operation Mode page. How to use Wi-Fi Protected Setup While in Range Extender mode, you can use Wi-Fi Protected Setup™ to easily connect your WAP300N to your wireless router and wireless client devices. The way you use Wi-Fi Protected Setup for your WAP300N varies, depending on whether your WAP300N has already connected to the router. If your WAP300N has not yet connected to a router: •• To connect your WAP300N to a wireless router, follow the instructions in “How to use Wi-Fi Protected Setup” on page 13. If your WAP300N has already connected to a router: •• To connect your WAP300N to a wireless client device, follow the instructions in “How to use Wi-Fi Protected Setup” on page 9. How to manually set up your WAP300N You can manually set up your WAP300N’s connection to a wireless router, or you can change its existing connection to a wireless router. If your WAP300N has not yet connected to a router: •• Follow the instructions in “How to manually set up your WAP300N” on page 14). If your WAP300N has already connected to a router: 1. Refer to “How to manually set up your WAP300N” on page 14) for information on the menu’s fields. To connect to a different router, change the field values, then click Save Settings. 16 Linksys WAP300N How to set up Wireless Bridge Mode To set up Wireless Bridge mode: Wireless > Basic Wireless Settings 1. Log into the browser-based utility (see “How to open the browser-based utility” on page 8). Click the Wireless tab, then click the Basic Wireless Settings page. Setting Up: Basics Channel—Choose the operating channel for your wireless network. CAUTION While in Wireless Bridge mode, this device can communicate with other WAP300N devices only if they are also in Wireless Bridge mode and the wireless settings are all identical. Example 1 You want to connect two wired networks together using Two WAP300N devices. One WAP300N will need to be on each network. Enter (A)’s Local Wi-Fi MAC Address into (B)’s Remote Wireless Bridges’ WiFi MAC Addresses field. Enter (B)’s Local Wi-Fi MAC Address into (A)’s Remote Wireless Bridges’ WiFi MAC Addresses field. [. . . ] 17 Linksys WAP300N Konfigurere trådløs sikkerhet FORSIKTIG I modus for trådløs bro kan denne enheten kommunisere med andre WAP300N-enheter bare hvis disse også er i modus for trådløs bro og alle trådløsinnstillingene er identiske. Slik konfigurerer du trådløs sikkerhet for WAP300N i modus for trådløs bro: Wireless > Wireless Security (Trådløst > Trådløs sikkerhet) 1. Når WAP300N er i modus for tilgangspunkt, kan du filtrere tilgangen til det trådløse nettverket ved å angi Wi-Fi MAC-adresser for de trådløse enhetene som er innenfor rekkevidden til nettverket. 20 Linksys WAP300N Konfigurasjon: Avansert Endre passord Du kan endre passordet for WAP300N for å begrense tilgangen til det webbaserte verktøyet. [. . . ]