User manual LINKSYS WET54GS5

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 Model No. 802. 11g GHz Wireless-G Ethernet Bridge with 5-Port Switch WIRELESS User Guide WET54GS5 Wireless-G Ethernet Bridge with 5-Port Switch Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2004 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. How to Use this Guide Your guide to the Wireless-G Ethernet Bridge has been designed to make understanding networking with the Wireless-G Ethernet Bridge easier than ever. [. . . ] Address Learning is used to determine if the switch should automatically learn the mac address for the packets; the default is enabled. Age Timer is is used to determine the idle time out of each address entry. · New Address Entry -Mac Address is the destination mac address. Output Port Vector is the output ports where the packet should be routed to if there is a mac address match. Note, the packets can be routed to more than 1 port. The static address entry will be locked in the table and does not idle the timeout. To add entries, select the port's check box and click the Add New Entry button. To delete entries, select the port's check box and click the Delete Selected Entry button. · Static Address Table - This lists the static MAC address entries and the output port vector settings. · Address Table Dump - This is a complete dump of the address table, including both the dynamic learned entries and static entries. If there is a topology change, click the Flush Table to button to remove all the Figure 7-17: Switch Table Tab Chapter 7: Using the Wireless-G Ethernet Bridge Web-based Utility Wireless 33 Wireless-G Ethernet Bridge with 5-Port Switch dynamic learned entries to force it to learn again. It will only dump at most 64 entries per page. If there are already 64 entries, use Get Next Page to get more pages. · Life Remaining - This is the life remaining before an idle time out. If the switch received any packets with the same destination MAC address, then the life value will reset to 15. If the life value decreases to 0, then it will be removed from the table. The idle timeout is configured in the Age Timer field. A static address entry will appear as locked or locked multicast in the address table. An entry might also be added by the bridge when certain protocol (eg. That entry will have a management subtitle. VLAN This screen is used to configure the 802. 1q VLAN and port based VLAN feature, and to add and delete individual 802. 1q VLAN entries. Global VLAN Setting · Disable - This will disable all VLAN function. · 802. 1q Check - In this 802. 1q mode, when a packet comes in, the switch will parse for it's VLAN tag first. If the packet does not have a VLAN tag, the default VID of the inport will be used as its VLAN ID. [. . . ] Customers located outside of the United States of America and Canada are responsible for all shipping and handling charges. ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF THE WARRANTY PERIOD. ALL OTHER EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF NON-INFRINGEMENT, ARE DISCLAIMED. Some jurisdictions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to You. [. . . ]