User manual LINKSYS WPS11

[. . . ] Instant WirelessTM Series Wireless PrintServer Use this Guide to install: Model No. : WPS11 User Guide COPYRIGHT & TRADEMARKS Copyright © 2001 Linksys, All Rights Reserved. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other trademarks and brand names are the property of their respective proprietors. LIMITED WARRANTY Linksys guarantees that every Instant Wireless® Wireless PrintServer is free from physical defects in material and workmanship for one year from the date of purchase, when used within the limits set forth in the Specification section of this User Guide. [. . . ] Selecting Yes here will terminate the printing if there is an error of any kind. If you select No, print jobs that have errors will be sent to the printer, but may not print properly. If you make any mistakes prior to saving, you can simply hit the Cancel button, which will exit the screen without making any changes. Once you are certain of any changes you have made, click the Save button to implement the changes. 29 Click the SNMP tab to view or change the SNMP settings of the Wireless PrintServer. The Wireless PrintServer supports SNMP (Simple Network Management Protocol). This allows network supervisors to monitor and control the Wireless PrintServer using network management platforms such as HP OpenView, IBM SystemView, etc. The appropriate MIB file must be imported into your SNMP management program using the Import-Compile command. Check your management program for details on this procedure. The MIB file is provided in the Mib folder on the CD-ROM. General SysContact Text Field - Name of the contact person. SysLocation Text Field - Location of the contact person. 30 Instant WirelessTM Series Wireless PrintServer Management Stations No. Select the Management station (1. . 4), and click the Get Data button to update the display for the selected item. IP Address Enter the IP Address of the management station, which has the SNMP program installed. Enter the name of the community, normally "public" or "private". Access Select the desired level of access. Select the Trap Receiver number (1. . 4), and click the Get Data button to update the display for the selected item. IP Address Enter the IP Address of the Trap Receiver, which will be sent the Trap message. Enter the name of the community, normally "public" or "private". Enable Check to enable; select the severity level. Note: Currently, all traps are level one. If you make any mistakes, you can simply hit the Cancel button, which will exit the screen without making any changes. Once you are certain of any changes you have made, click the Save button to implement the changes. Internet Printing Protocol (IPP) IPP (Internet Printing Protocol) is a new standards-based system to allow remote printing from a PC to any accessible printer. [. . . ] While IP takes care of handling the actual delivery of the data, TCP takes care of keeping track of the individual units of data (called packet) that a message is divided into for efficient routing through the Internet. 47 TCP/IP - Transmission Control Protocol/Internet Protocol (TCP/IP) is the basic communication language or protocol of the Internet. It can also be used as a communications protocol in a private network (either an intranet or an extranet). When you are set up with direct access to the Internet, your computer is provided with a copy of the TCP/IP program just as every other computer that you may send messages to or get information from also has a copy of TCP/IP. Upgrade - To replace existing software or firmware with a newer version. [. . . ]