User manual LINKSYS WRK54G

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Broadband Router WIRELESS Model No. User Guide WRK54G v1. 1 Wireless-G Broadband Router Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000. Click the Network and Internet Connections icon and then the Network Connections icon. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Enter a unique IP address that is not used by any other computer on the network connected to the Router. Enter the Default Gateway, 192. 168. 1. 1 (Router's default IP address). Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information. Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window. For Windows 98SE, Me, 2000, and XP: Appendix A: Troubleshooting Common Problems and Solutions 38 Wireless-G Broadband Router · Refer to "Chapter 5: Configuring the PCs" for details. Make sure Obtain IP address automatically is selected in the settings. For Windows 98SE and Me: · Click Start and Run. Press the Enter key or click the OK button. For Windows 2000 and XP: · Click Start and Run. Press the Enter key or click the OK button. In the command prompt, type ping 192. 168. 1. 1 and press the Enter key. · If you get a reply, the computer is communicating with the Router. · If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter. C In the command prompt, type ping followed by your Internet or WAN IP address and press the Enter key. The Internet or WAN IP Address can be found on the Status screen of the Router's web-based utility. For example, if your Internet or WAN IP address is 1. 2. 3. 4, you would enter ping 1. 2. 3. 4 and press the Enter key. [. . . ] EN 609 50 Safety 68 Appendix I: Regulatory Information Wireless-G Broadband Router EN 300-328-1, EN 300-328-2 Technical requirements for Radio equipment. Caution: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow. [. . . ]