User manual LINKSYS WRT160NL

[. . . ] USER GUIDE Wireless-N Broadband Router with Storage Link Model: WRT160NL About This Guide About This Guide Icon Descriptions While reading through the User Guide you may see various icons that call attention to specific items. Below is a description of these icons: NOTE: This tick indicates that there is a note of interest and is something that you should pay special attention to while using the product. WARNING: This exclamation mark indicates that there is a caution or warning and it is something that could damage your property or product. wEB: This globe icon indicates a noteworthy website address or email address. [. . . ] priority  This column displays the bandwidth priority of High , Medium , Normal or Low. Local Management Access Access via  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. 26 Wireless-N Broadband Router with Storage Link Chapter 3 Advanced Configuration Allow Users to Disable Internet Access  Select Enabled, if you want to be able to prohibit any and all Internet connections. Otherwise, keep the default setting of Disabled. Access via Wireless  If you are using the Router in a public domain where you are giving wireless access to your guests, you can disable wireless access to the Router’s web-based utility. You will only be able to access the utility via a wired connection if you disable the setting. Keep the default setting of Enabled, to allow wireless access to the utility or select Disabled to block wireless access to the utility. Backup and Restore Backup Configurations  To back up the Router’s configuration settings, click this button and follow the on‑screen instructions. Restore Configurations  To restore the Router's configuration settings, click this button and follow the onscreen instructions. (You must have previously backed up the Router's configuration settings). Click Save Settings to apply your changes or click Cancel Changes to cancel your changes. Remote Access Remote Management  To permit remote access of the Router, from outside the local network, select Enabled. Otherwise, keep the default setting of Disabled. Access via  HTTP (HyperText Transport Protocol) is the communications protocol used to connect to servers on the World Wide Web. Remote Upgrade  If you want to be able to upgrade the Router remotely, from outside the local network, select Enabled. (You must have the Remote Management feature enabled as well). Otherwise, keep the default setting of Disabled. Allowed Remote IP Address  If you want to be able to access the Router from any external IP address, select Any IP Address. If you want to specify an external IP address or range of IP addresses, then select the second option and complete the fields provided. Remote Management Port  Enter the port number that will be open to outside access. NOTE: When you are in a remote location and wish to manage the Router, enter http://xxx. Enter the Router’s specific Internet IP address in place of xxx. [. . . ] Actually both licences are BSD-style Open Source licences. This package is an SSL implementation written by Eric Young (eay@cryptsoft. The implementation was written so as to conform to Netscape's SSL. This library is free for commercial and non-commercial use as long as the following conditions are adhered to. [. . . ]