User manual LINKSYS WRT54GP2A-AT

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g WIRELESS Broadband Router with 2 Phone Ports User Guide Model No. WRT54GP2A-AT Wireless-G Broadband Router with 2 Phone Ports Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2004 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] If you are using call waiting, the status of the incoming phone call is shown here. Click the Refresh button to update the on-screen information. For help information, click Help. Chapter 5: Configuring the Router The Status Tab - Voice 43 Wireless-G Broadband Router with 2 Phone Ports Chapter 6: Signing up for AT&T CallVantagesm Service Overview After you have installed and configured the Router for your Internet connection, you can sign up for Internet phone service or activate your account. Follow these instructions to access the AT&T website. Instructions 1. Launch Internet Explorer, and enter http://www. att. com/linksys in the Address field. If you already have an Internet phone service account with AT&T, then select I signed up for service and want to activate. If you do not have an Internet phone service account with AT&T, then select I have my Linksys Router and want to sign up for service. When you have activated your Internet phone service, the Phone 1 LED on the Router's front panel will light up. When you pick up the phone, you will hear a dial tone. Then you will be able to make Internet phone calls. If you experience any problems, refer to "Appendix A: Troubleshooting" for more information. Figure 6-1: Website for AT&T CallVantage Service Chapter 6: Signing up for AT&T CallVantagesm Service Overview 44 Wireless-G Broadband Router with 2 Phone Ports Appendix A: Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Router. Read the description below to solve your problems. If you can't find an answer here, check the AT&T website at http://www. usa. att. com/callvantage/faqs/index. jsp or the Linksys website at www. linksys. com. Common Problems and Solutions 1. I don't hear a dial tone, and the Phone 1 LED is not lit. Go through this checklist until your problem is solved: · Make sure the telephone is plugged into the Phone 1 port. · Disconnect and re-connect the RJ-11 telephone cable between the Router and telephone. · Make sure your telephone is set to its tone setting (not pulse). · Make sure your network has an active Internet connection. Try to access the Internet, and check to see if the Router's Internet LED is lit. If you do not have a connection, power off your network devices, including the Router and cable/DSL modem. Wait 30 seconds, and power on the cable/DSL modem first. [. . . ] Outdoor use may be restricted to certain frequencies and/or may require a license for operation. Contact local Authority for procedure to follow. Note: Combinations of power levels and antennas resulting in a radiated power level of above 100 mW equivalent isotropic radiated power (EIRP) are considered as not compliant with the above mentioned directive and are not Appendix H: Regulatory Information 75 Wireless-G Broadband Router with 2 Phone Ports allowed for use within the European community and countries that have adopted the European R&TTE directive 1999/5/EC. For more details on legal combinations of power levels and antennas, contact Linksys Corporate Compliance. [. . . ]