User manual LINKSYS WRT54GX

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Broadband Router WIRELESS with SRX User Guide Model No. WRT54GX Wireless-G Broadband Router with SRX Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] Contact your ISP or go on its website to find the information. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window. · For Windows XP: The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000. Click the Network and Internet Connections icon and then the Network Connections icon. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Enter a unique IP address that is not used by any other computer on the network connected to the Router. Enter the Default Gateway, 192. 168. 1. 1 (Router's default IP address). Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information. Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window. For Windows 98SE, Me, 2000, and XP: Appendix A: Troubleshooting Common Problems and Solutions 37 Wireless-G Broadband Router with SRX · Refer to "Appendix D: Windows Help" for details. Make sure Obtain IP address automatically is selected in the settings. For Windows 98SE and Me: · Click Start and Run. Press the Enter key or click the OK button. For Windows 2000 and XP: · Click Start and Run. Press the Enter key or click the OK button. In the command prompt, type ping 192. 168. 1. 1 and press the Enter key. · If you get a reply, the computer is communicating with the Router. · If you do NOT get a reply, please check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter. [. . . ] INDUSTRY CANADA (CANADA) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. EC DECLARATION OF CONFORMITY (EUROPE) Linksys declares that the Wireless-G Broadband Router conforms to the specifications listed below, following the provisions of the European R&TTE directive 1999/5/EC: EN 301 489-1, 301 489-17 General EMC requirements for Radio equipment. [. . . ]