User manual LINKSYS WRT54GX4

[. . . ] ® A Division of Cisco Systems, Inc. 2. 4 GHz Wireless-G 802. 11g Broadband Router WIRELESS with SRX400 User Guide Model No. WRT54GX4 Wireless-G Broadband Router with SRX400 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2005 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] As entered on the Wireless tab, this will display the wireless network name or SSID. As entered on the Wireless tab, this will display the channel on which your wireless network is broadcasting. Figure 5-44: Status Tab - Wireless Encryption Mode. As selected on the Wireless Security Tab, this will display what type of encryption the Router uses for security. Click the Refresh button to update the on-screen information. Help information is shown on the right-hand side of the screen. Chapter 5: Configuring the Wireless-G Broadband Router The Status Tab - Wireless 42 Wireless-G Broadband Router with SRX400 The Status Tab - System Performance The System Performance screen displays status information about network traffic for the Internet, wireless activities, and wired connectivity. System Performance Internet/Wireless Statistics for the network traffic on the Internet connection and wireless connectivity are shown in two separate columns. The IP address of the Router's interface is displayed here. The MAC address of the Router's interface is shown here. The number of packets received are displayed here. The status of the connection is shown here. The number of packets sent are displayed here. The number of bytes received is shown here. The number of error packets received is displayed here. The number of dropped packets received is displayed here. Figure 5-45: Status Tab - System Performance LAN Statistics for the network traffic on each of the four LAN ports are shown in four separate columns. The IP address of the Router's interface is displayed here. The MAC address of the Router's interface is shown here. This shows the status of the LAN Port connection and speed. The number of packets received is displayed here. Chapter 5: Configuring the Wireless-G Broadband Router The Status Tab - System Performance 43 Wireless-G Broadband Router with SRX400 Packets Sent. The number of packets sent is displayed here. The number of bytes received is shown here. The number of error packets received is displayed here. [. . . ] This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or attack. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS' LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. [. . . ]