User manual LINKSYS WRV200

[. . . ] 2. 4 GHz Wireless-G 802. 11g WIRELESS VPN Router with RangeBooster User Guide Model No. WRV200 Wireless-G VPN Router with RangeBooster Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. Copyright © 2006 Cisco Systems, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. [. . . ] To enable the Router to send email alerts in the event of Denial of Service attacks and the like, select Enabled. If you do not wish to have email alerts, select Disabled. The router will send out e-mail logs to a specific e-mail address. Enter the e-mail address so that the receiver can know where the mail is from. Enter the e-mail address where you want the alerts to be sent. There are ACL, DoS, URL Detect and New Connection event types for E-Mail Alert. You can select some of them to enable those event alerts. You may keep a log of the router's activities. This requires the installation of an external log viewer. Enter the address where you want the system log to be send. There are System, ACL, DoS, URL Detect and New Connection event types for System Log. You can select some of them to enable those event logs. Figure 6-49: The Administration Tab - Log When you have finished making changes on this screen, click the Save Settings button to save the changes, or click the Cancel Changes button to undo your changes. For help information, click More. Chapter 6: Configuring the Wireless-G VPN Router The Administration Tab - Log 53 Wireless-G VPN Router with RangeBooster The Administration Tab - Diagnostics The Diagnostcs allow you to check the connections of your network components. Ping Test Ping Test Parameters IP or URL Address. Enter the IP or URL address of the network device whose connection status you wish to test. Enter the number of times that you want to ping the device: 5, 10, 15. Click the Start to Ping button to start the test. The results of the test will be displayed in the window. To stop the test, click the Stop button. Click the Clear Log button to clear the screen. Click the Close button to return to the Diagnostics screen. Figure 6-50: The Administration Tab - Diagnostics Traceroute Test IP or URL Address. [. . . ] This warranty does not apply if the Product (a) has been altered, except by Linksys, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Linksys, or (c) has been subjected to abnormal physical or electrical stress, misuse, negligence, or accident. In addition, due to the continual development of new techniques for intruding upon and attacking networks, Linksys does not warrant that the Product will be free of vulnerability to intrusion or attack. TO THE EXTENT NOT PROHIBITED BY LAW, IN NO EVENT WILL LINKSYS BE LIABLE FOR ANY LOST DATA, REVENUE OR PROFIT, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES, REGARDLESS OF THE THEORY OF LIABILITY (INCLUDING NEGLIGENCE), ARISING OUT OF OR RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT (INCLUDING ANY SOFTWARE), EVEN IF LINKSYS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT WILL LINKSYS' LIABILITY EXCEED THE AMOUNT PAID BY YOU FOR THE PRODUCT. [. . . ]